Power Electronics / Power Management


Small 750 mA LDO powers 1,65 or 1,8 V ICs from 2,5 V supply

30 January 2002 Power Electronics / Power Management

Said to be the industry's smallest 750 mA regulator for 2,5 to 1,65 V conversion, is being offered by Micrel Semiconductor. Featuring the lowest dropout voltage of any 750 mA LDO on the market, it has a dropout voltage of only 300 mV at its full load of 750 mA. Main applications for the MIC3975 include powering today's 1,65 or 1,8 V digital ICs from a 2,5 V+10% system bus or 2,5 V digital ICs from a 3,3 V +10% system bus, says the manufacturer.

For applications requiring more than 750 mA, Micrel also offers the MIC3910x, MIC3915x, MIC3930x, and MIC3950x LDOs which can support continuous currents of 1,0, 1,5, 3,0 and 5,0 A, respectively.

The MIC3975 is offered in MSOP-8 packaging, making it the smallest 750 mA LDO with µCap capability. µCap design enables the device to support smaller, more reliable ceramic output capacitors.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...
High-precision current transducer
Power Electronics / Power Management
Danisense announces its new high-precision DP12IP current transducer designed for isolated DC and AC current measurement in demanding PCB-mounted power electronics applications.

Read more...
Secure holder for protected 18650 batteries
Power Electronics / Power Management
Designed for protected 18650 batteries up to 70 mm long, the holder offers secure retention for portable, industrial, and embedded applications.

Read more...
More room to scale
Altron Arrow Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.

Read more...
Surface mount power amplifier for high-power applications
RF Design Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.

Read more...
1200 V QSiC modules
Power Electronics / Power Management
SemiQ Inc has launched the QSiC Dual3, a family of 1200 V half-bridge MOSFET modules for motor drives in data centre cooling systems, grid converters in energy storage systems, and industrial drivers.

Read more...
MCOTS transient filter for military applications
RFiber Solutions Power Electronics / Power Management
SynQor has announced the new MCOTS-F-28-T-HE transient half-brick filter, the latest addition to its MCOTS product family.

Read more...
Expanded range of high-thermal-performance QSiC modules
Power Electronics / Power Management
SemiQ’s half-bridge series for data centre power converters and industrial motor drives features low RDSON SiC MOSFETs and parallel SBD diodes for best-in-class power density and conversion efficiency.

Read more...
Transporting lithium batteries and IoT devices
Power Electronics / Power Management
With billions of rechargeable and non-rechargeable lithium cells and batteries powering most of the world’s consumer and industrial electronic devices, shipping them to customers through vast global logistics chains is often an overlooked topic.

Read more...
Setting a new benchmark for high-power DC load testing
Conical Technologies Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved