Previously, Honeywell’s TruStability pressure sensors have been intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. The new single-side liquid media option allows the end customer to use one port of the sensor with condensing humidity or non-corrosive liquid media (ie. de-ionised water), eliminating the complexity or added expense of having to protect the sensor from this type of media. The sensors offer different accuracies and compensated temperature ranges that address specific segment needs.
Featuring high stability and tight accuracy specification, their modular and flexible design manifests in a variety of package styles and options. The HSC series is designed to provide a ±1% total error band specification, compensated across a 0°C to 50°C temperature range. The SSC series is designed to provide a ±2% total error band specification, compensated across a wider -20°C to 85°C range.
The HSC and SSC series’ footprint is very small in comparison to most silicon pressure sensors, including the current Honeywell portfolio. Despite their small size, they are temperature compensated, calibrated and provide an amplified signal, typically allowing the customer to remove the components associated with signal conditioning from the PCB to increase space and reduce costs often associated with those components (eg., acquisition, inventory, assembly). This integrated capability often eliminates problems that could occur from having multiple signal conditioning components across the PCB.
Both series offer the option of analog or digital outputs. Digital ASIC output in either I²C or SPI protocols from digital sensors accelerates performance through reduced conversion requirements and the convenience of direct interface to microprocessors or microcontroller.
Custom calibration ranges, output options, power options (3,3 V d.c. or 5,0 V d.c.), pressure types (absolute, differential, gauge, compound), pressure ranges (1 psi to 150 psi), a wide array of mounting options (through-hole SIP, DIP and surface mount technology), and multiple package options provide support for many unique applications. They are designed to provide digital correction of sensor offset, sensitivity, temperature coefficients and non-linearity.
Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...The switch to 400G Ethernet TRX Electronics
Editor's Choice Telecoms, Datacoms, Wireless, IoT
The key drivers behind the adoption of 400G Ethernet will be the demands created by data-intensive applications, such as AI, cloud computing, big data analytics, and high-definition video streaming.
Read more...Combining a LPF and ADC driver for a 20 Vp-p signal Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...Pressure sensor with NextNav certification EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...Multi-zone distance sensor with 90° field of view Avnet Silica
Analogue, Mixed Signal, LSI
STMicroelectronics has revealed a new FlightSense multi-zone distance sensor, with 90° field of view, to bring lifelike situational awareness to applications like home automation, computers, robots, and smart equipment.
printer friendly version