Diodes Incorporated introduced the AH1911/AH1921 digital Hall effect sensors, which combine stable operating and release points (BOP and BRP) with ultra low-power operation. The third-generation devices will respond to either polarity of magnetic field and use a ‘hibernating clock’ system to reduce average current consumption to 1,6 μA at 3 V supply.
A wide operating voltage range of 1,6 V to 5,5 V enables the part to be used with a variety of system voltages. Operating and release points for the magnetic switch are tightly controlled over temperature and supply voltage due to advanced stabilising techniques for accurate and repeatable performance. Flux density switching points are typically ±60 Gauss (6 mT) to operate and ±45 Gauss (4,5 mT) to release.
The AH1911/21 is ideal for battery-powered devices where the low power consumption and wider operating voltage range help to extend battery life. Typical applications include medical and consumer products, tamper detection for e-meters, smoke detectors, IoT devices and general level/proximity detection.
Available in the industry-standard three-pin SC59 package, the AH1911 and AH1921 feature push-pull and open-drain outputs, respectively. Both are specified over the -40°C to +85°C temperature range and have a high ESD rating of 6 kV (Human Body Model).
Wi-Fi 6 and Bluetooth LE co-processor Altron Arrow
Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...1-Wire EEPROM with secure authenticator Altron Arrow
DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.
Read more...The 6 GHz band radio solution Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.
Read more...New clock generator family Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Based on Skyworks’ fifth generation DSPLL and MultiSynth technologies, these devices enable any-frequency, any-output clock generation.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...Ultra-low-power wireless module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WBA5MMG from STMicroelectronics is an ultra-low-power, small form factor, certified 2,4 GHz wireless module that supports Bluetooth LE, Zigbee 3.0, OpenThread, and IEEE 802.15.4 proprietary protocols.
Read more...16-channel multicell battery monitor Altron Arrow
Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version