MEC has introduced a new range of variable extenders that brings a high degree of flexibility to designers.
Sourcing different components with the same built-up height to suit the PCB design has, in the past, been a problem in the design of electronic equipment. The availability of these new variable height extenders, when used in combination with the numerous and highly functional keycaps in the 3F Multimec switch series, means that the designer is far less dependant on component size, allowing choice to be made purely in terms of specification.
The MEC extenders are available as standard, in six different heights (5-10 mm) with the overall height increasing in steps of 1 mm. Any height between 5-10 mm can be produced on request.
The overall height of the 3F Multimec switches with keycaps is 14,9 to 29,1 mm depending on the keycap design selected. The popular Unimec switch can also be used with this new extender.
To obtain datasheet and sample please contact the distributor.
40 W and 75 W railway DC/DC converter Brabek
Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.
Read more...4 kW e-mobility DC-DC converter Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...Power-dense modules operate up to 115 V DC Brabek
Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...LED indicators Brabek
Switches, Relays & Keypads
The Dual Icon series from APEM is an LED indicator that presents two distinct visual signals within a single unit.
Read more...Reed relay upgraded to 200 W
Switches, Relays & Keypads
Engineers gain 200 W switching power in Pickering’s Series 68 HV relays with flying leads, ideal for demanding test, medical, and energy applications.
Read more...Industrial hand controller Brabek
Switches, Relays & Keypads
The HC Series hand controller from APEM is a pre-qualified solution for use in demanding industrial environments.
Read more...Customisable high-voltage reed relay
Switches, Relays & Keypads
Pickering Electronics has introduced its Series 600 relays, the company’s most customisable range of high voltage reed relays to date.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version