27 March 2019Enclosures, Racks, Cabinets & Panel Products
The new 1551V miniature ventilated sensor enclosures from Hammond Manufacturing are designed to house sensors and small sub-systems installed in the manufacturing environment as part of IoT (Internet of Things) systems.
While there is no relevant international standard, the 1551V enclosures are designed around the PCB (printed circuit board) sizes selected by leading sensor manufacturers for their latest generations of products.
The ABS UL94-HB 1551V is available in black, grey and white as standard, and in four plan sizes: 80 x 80 mm, 80 x 40 mm, 60 x 60 mm and 40 x 40 mm, each 20 mm high. Maximum PCB sizes are 74 x 74 mm, 74 x 34 mm, 54 x 54 mm and 34 x 34 mm, respectively.
Four PCB mounts are moulded into the base and the 20 mm height gives enough space for board-mounted RJ45, USB and other standard communication interfaces. To simplify access, the snap-fit closure allows repeated opening and closing without tools. There are ventilation slots on all four vertical faces, and mounting slots and a 15 mm cable knock-out in the base.
Environmental sensors monitoring basics such as temperature, humidity and pressure are widely installed, and are now increasingly intelligent sub-systems, with data processing and communications capability embedded on a small PCB. For active components that produce relatively large amounts of waste heat, the 1551V provides excellent airflow for cooling purposes.
Polypropylene pole-top boxes support smarter, more secure electricity networks
Manufacturing / Production Technology, Hardware & Services Enclosures, Racks, Cabinets & Panel Products
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems (PPS) is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.
Read more...Cabinets for industrial applications Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
Verotec’s VERAK cabinets addresses the most stringent enclosure requirements providing both IP65 environmental protection and EMC screening.
Read more...DC-link capacitors with ultra-low inductance Electrocomp
Passive Components
TDK Corporation recently released its new series of MKP DC high-frequency film capacitors, a high-performance DC link capacitor platform for next-generation SiC-based power electronics.
Read more...Flat-pack enclosures
Enclosures, Racks, Cabinets & Panel Products
The launch of Rittal’s FR IT flat-pack enclosure marked a milestone for the company, introducing the local market to a high-capacity, top-tier IT enclosure in a convenient and cost-effective flat-pack format for the first time.
Read more...Non-contact linear position sensor Electrocomp
Test & Measurement
The Vishay 40 LHE Linear Position Sensor, designed for industrial motion control and automation, delivers robust, non-contact measurement performance using Hall effect technology.
Read more...Compact 1250 V choke solution Electrocomp
Passive Components
TDK Corporation has introduced a new high-voltage common-mode choke series designed to support more compact and efficient 1250 V DC converter architectures in next-generation power electronics.
Read more...Flat-pack IT enclosure Rittal
Enclosures, Racks, Cabinets & Panel Products
The introduction of the FR IT flat-pack enclosure by Rittal marked an important milestone for the company, bringing a high-capacity, premium IT enclosure to the local market in a convenient and cost-effective flat-pack format for the first time.
Read more...Click-in module carrier frames Phoenix Contact
Enclosures, Racks, Cabinets & Panel Products
The tool-free Heavycon series click-in module carrier frame from Phoenix Contact simplifies the assembly and installation of heavy-duty connectors significantly.
Read more...Die-cast enclosures in non-rectangular formats Communica
Enclosures, Racks, Cabinets & Panel Products
These models from Hammond Manufacturing, the 1590TRP and 1590STP, provide additional flexibility for product designers who require strong aluminium enclosures, but want alternatives to the traditional rectangular form factor.
Read more...Enclosures engineered for extremes RS South Africa
Enclosures, Racks, Cabinets & Panel Products
When electronic components face the relentless demands of heavy industry or unpredictable outdoor elements, Takachi’s IP67 diecast aluminium enclosures provide a robust line of defence.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version