The highly integrated miniPROFET (for fully PROtected FET) switch from Infineon Technologies incorporates a broad range of smart functions that makes it suitable for the widest variety of automotive and industrial applications. miniPROFETs are designed to be controlled directly from a single mC output pin. With a typical quiescent current of less than 10 mA, they are positioned as a high-side switch of choice for battery-powered systems. Their built-in safety features protect both the device and the application.
miniPROFETs require fewer components than discrete solutions and therefore enable more compact, robust application designs. This reduces board space and costs. The tightly integrated design also reduces wiring and connector requirements.
The most important protective function of a miniPROFET is to safeguard the application from destruction in the event of a short circuit. This is achieved through a combination of both current limitation and thermal shutdown in the event of excess temperature. By combining switching and protective functions in a single device, it eliminates the need for fuses, thus presenting a more cost-effective and robust alternative to standard relay and fuse solutions.
miniPROFETs are suited to automotive applications such as general body control modules, instrument clusters, dashboard lighting and motor controls. Industrial applications include relay and fuse replacement, lamps, solenoids, DC motors, power control in appliances and portable tools, various automated designs in robotics, and industrial control.
General features are: overload/short protection; current limit; thermal shutdown; past demagnetisation of inductive loads; 3 V CMOS and TTL-compatible input; loss of ground and loss of supply protection; and ESD protection.
4 kW e-mobility DC-DC converter Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...Non-contact linear position sensor Electrocomp
Test & Measurement
The Vishay 40 LHE Linear Position Sensor, designed for industrial motion control and automation, delivers robust, non-contact measurement performance using Hall effect technology.
Read more...Aluminium case upgrade boosts performance Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
Read more...Extending the range of power converters RS South Africa
Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.
Read more...Power-dense modules operate up to 115 V DC Brabek
Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.
Read more...Finding value for money with your IoT battery Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version