G.fast transformers

27 March 2019 Passive Components

Würth Elektronik announced the release of additional G.fast transformers to the MID-DSLSCK family approved for use with Sckipio chipsets. These transformers cover both the 106 MHz and 212 MHz G.fast profiles and have low insertion loss over the entire frequency range, enabling data rates up to 1 Gbps on lines less than 300 metres long.

These low-profile transformers are surface mounted with maximum heights between 3,7 mm and 5 mm, and offer low inter-winding capacitance and low insertion loss. Featuring 1 875 V isolation, and having an operating temperature of -40°C to 85°C, these pick-and-placeable transformers are designed to meet IEC60950-1, EN60950-1, UL60950-1/CSA60950-1 and AS/NZS60950.1 supplementary insulation with 6 kV surge or functional insulation.

In addition to providing isolation, the new MID-DSLSCK transformers maintain the quality of the signal over a maximum transmission distance. These transformers enable Sckipio’s SCK1002 AFE and SCK1001 DFE chipsets to deliver high-speed broadband access for G.fast modems present in consumer residences or CPE, central office, distribution point units, and supporting data speeds up to 1 Gbps on phone lines or coax lines.

For more information contact Jason Page, Würth Elektronik eiSos, +27 71 259 9381, [email protected], www.we-online.com

Further reading:

PCB connectors for power systems
Phoenix Contact Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.

Read more...

---

Polymer caps with very high ripple current capability
RS South Africa Passive Components
TDK Corporation has released the B40910 series of hybrid polymer capacitors, which can handle up to 4,6 A at 100 kHz and 125°C.

Read more...

---

SPE connector range
Phoenix Contact Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.

Read more...

---

TDK expands MLCC series
RS South Africa Passive Components
TDK Corporation has expanded its CGA series of multilayer ceramic capacitors, currently being the highest capacitance in 100 V products for automotive applications.

Read more...

---

Inductor supports temperatures up to 150°C
RS South Africa Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.

Read more...

---

Long-range passive infrared motion sensor
Future Electronics Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.

Read more...

---

Isolated solid state relay
Altron Arrow Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.

Read more...

---

Low-profile power inductors
RS South Africa Passive Components
TDK Corporation has announced the introduction of its new PLEA85 series of high-efficiency power inductors developed for battery-powered wearables and other devices.

Read more...

---

Miniature capacitor for automotive applications
Avnet Abacus Passive Components
Murata has released its LLC series of multi-layer ceramic capacitors for automotive applications, that feature a reversed termination for low ESL.

Read more...

---

Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...

---