27 March 2019
Power Electronics / Power Management
The main feature of the primary switched module PM-IP67A200 developed by MTM Power is its design suitable for applications with protection degree IP67. It is specifically designed for the electrical supply of control, sensor and actuating systems in the field directly at the application.
The power supplies of this series allow use as a ‘plug and play’ solution directly on-site. This is possible due to the connection via special 7/8" connectors and the thermoselective vacuum encapsulation developed by MTM.
The units are available with 24 V single and dual output voltages, and are certified according to the standards UL 60 950-1 and UL 508. They have a 90 - 264 V a.c. and 100 - 300 V d.c. input range, and are designed for worldwide use under extreme environmental conditions in on-machine applications.
As an option, units with 24 V output are also available with variable current limiting designed to allow a short increase of the output power to 150%. This function, known as power boost, allows application on motors, capacitive loads, etc. which exhibit difficult startup characteristics.
The outputs of the dual-output version are galvanically separated with 500 V a.c. isolation voltage and independently regulated. The devices are according to protection degree 1 and comply with the Low Voltage Directive as well with the up-to-date EMC standards as regards CE conformity. They are constantly short circuit protected, need no ground load, and operate within a temperature range of -25°C to +60°C.
Ultra-portable spectrum analyser Vepac Electronics
Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.
Read more...Versatile 3-in-1 instrument Vepac Electronics
Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.
Read more...Powering Innovation eBook: Changing what’s possible
Power Electronics / Power Management
This exclusive read, entitled ‘Changing what’s Possible,’ delves into how power dense Vicor modules enable many world-changing innovations across various sectors.
Read more...16-channel multicell battery monitor Altron Arrow
Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.
Read more...Reliable redundancy with the Mibbo M3DN Series Conical Technologies
Power Electronics / Power Management
Designed for use with two parallel-connected power supplies, the M3DN Series allows for true redundancy, making it ideal for mission-critical applications.
Read more...Automotive power-over-coax inductor RS South Africa
Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.
Read more...Rugged PSU for challenging conditions Conical Technologies
Power Electronics / Power Management
Built for rugged reliability, the Mibbo MFC Series delivers stable, efficient power in environments where moisture, dust, and temperature extremes are everyday challenges.
Read more...Enhance SiC device efficiency using merged-pin Schottky diodes NuVision Electronics
Editor's Choice Power Electronics / Power Management
Silicon carbide (SiC) has advantages over silicon (Si) that make it particularly suitable for Schottky diodes in applications such as fast battery chargers, photovoltaic (PV) battery converters, and traction inverters.
Read more...15 W power module with wide input range Brabek
Power Electronics / Power Management
RECOM’s miniature power modules provide 15 W output and operate over a wide input range of 18-264 V AC or 18-375 V DC.
Read more...Industrial-grade DIN rail PSU Conical Technologies
Power Electronics / Power Management
The Mibbo MTR960W is a reliable and cost-effective PSU option that delivers a solid 960 W of output power at 24?or 48 V DC.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version