Computer/Embedded Technology


SSDs for industrial computing

30 April 2019 Computer/Embedded Technology

Innodisk has packaged Toshiba’s next-generation 3D NAND Flash technology into an industrial-grade solid state drive (SSD) designed to tackle the tough conditions seen in many embedded environments and to handle the challenges of edge computing.

The devices use industrial-grade 3D TLC NAND Flash with a rated program/erase cycle number of 3000, to ensure lasting endurance as required by many embedded applications. The firmware is also optimised for industrial use and the SSDs strictly avoid SLC caching to avoid performance drops and increased write amplification, which lower program/erase cycle numbers through excessive data transfers within the SSD.

The series includes two models – 3TE7 and 3TG6-P – with the former being DRAM-less and the latter using an external DRAM chip and a Marvell controller. The modules can incorporate AES encryption for data security and end-to-end data path protection to ensure error correction at every point of data transfer.

The modules can also be fitted with Innodisk’s trio of power stabilising technologies – iCell, iPower Guard and iData Guard – to further strengthen data integrity in areas susceptible to power fluctuations.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cabinets for industrial applications
Vepac Electronics Enclosures, Racks, Cabinets & Panel Products
Verotec’s VERAK cabinets addresses the most stringent enclosure requirements providing both IP65 environmental protection and EMC screening.

Read more...
Vertiv expands rack PDU portfolio
Computer/Embedded Technology
Vertiv has announced its new Vertiv PowerIT rack power distribution units designed to address the rising power needs of data-intensive workloads, including AI and high-performance computing.

Read more...
Bluetooth 6.0 module provides channel sounding
Avnet Silica Computer/Embedded Technology
The latest Bluetooth module from Panasonic Industry provides excellent performance and minimal power consumption.

Read more...
Rugged PoE switch built for industrial demands
Conical Technologies Computer/Embedded Technology
The rugged Planet IGS-5225-8P4S-12V comes in a compact, rugged, and highly efficient design, making it the switch of choice for engineers working in harsh environments.

Read more...
High-performance networking for demanding environments
Electronic Products Design Computer/Embedded Technology
The Raptor-Epsilon Ethernet switch system is a ruggedised networking solution engineered to deliver advanced switching capabilities, superior reliability, and energy-efficient operation in the most demanding environments.

Read more...
SIGLENT launches new 8 GHz DSO
Vepac Electronics Test & Measurement
SIGLENT has unveiled the enhanced SDS7000A/AP models, building on the success of its SDS7000A high-resolution digital oscilloscope series.

Read more...
Rugged, I/O-rich NVIDIA Jetson solutions
Electronic Products Design Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.

Read more...
Mission-critical RF transceiver
Vepac Electronics Telecoms, Datacoms, Wireless, IoT
The Iris SQN9506 from Sequans Communications is a wide-band RF transceiver that operates from 220 MHz to 7,125 GHz.

Read more...
New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved