Configurable modular transfer for robot assembly cells
29 July 2019
Manufacturing / Production Technology, Hardware & Services
The LCM100 linear conveyor module, a new solution for robotic assembly by Yamaha’s Factory Automation (FA) Section, enables cleaner, quieter and more flexible workpiece transport. By simplifying production startup, reducing cycle times, and increasing accuracy, the modules boost productivity and yield, while also cutting noise, increasing reliability, and reducing the size of robot assembly cells.
Unlike conventional belt and roller conveyors, each LCM100 module contains an independently controlled, high-speed linear motor that enables bidirectional movement and programmable speed up to
3000 mm/second. Production lines can be configured optimally, not dependent on the longest process cycle time, and utilise inline equipment more efficiently to save space and capital expenditure. Further benefits of the linear drives include low friction and lag-free acceleration and deceleration.
The robust and stable sliders, combined with positioning accuracy better than ±0,015 mm, allow assembly tasks to be performed directly on the module. With no need to de-palletise and move workpieces from a conventional conveyor to a worktable, tact time can be faster and assembly cells smaller and more cost-effective. Without physical microswitches or end stops, slider stop positions can be quickly and easily reprogrammed in software.
In addition, LCM100 modules are designed for easy interchangeability and reconfiguration, enabling assembly cells to be setup quickly and cost-effectively, especially for short production runs. Modules can also be removed or replaced easily to minimise downtime, and reused in other assembly cells to maximise utilisation.
The modules are available in standard 480 mm and 640 mm lengths and carry a 15 kg maximum payload. A 400 mm circulation module is also available.
For more information contact Truth Electronic Manufacturing, +27 31 822 8555, [email protected]
World-first 016008 mm component placement
Manufacturing / Production Technology, Hardware & Services
Fuji has achieved the world’s first placement of 016008 mm (0,16 x 0,08 mm or 006 x 003 inches) size components on printed circuit boards with its SMT pick and place machine, NXTR.
Read more...Lifecycle and obsolescence: Protecting electronics through process Production Logix
Manufacturing / Production Technology, Hardware & Services
At Production Logix, we believe longevity is not accidental. It is engineered through early visibility, structured response, and disciplined execution, in partnership with our OEM customers.
Read more...Maximising squeegee quality and durability Testerion
Manufacturing / Production Technology, Hardware & Services
Transition Automation has announced two new product advancements designed to improve SMT printing performance and extend squeegee life: laser-enhanced Permalex bonding and integrated edge protectors.
Read more...NeoDen ND2 PCB screen printer ZETECH ONE
Manufacturing / Production Technology, Hardware & Services
The NeoDen ND2 PCB screen printing machine is a fully automatic stencil printer designed to deliver precise and consistent solder paste application in modern SMT production environments.
Read more...Understanding the BGA rework process Techmet
Manufacturing / Production Technology, Hardware & Services
BGA rework is a highly technical process that involves removing the faulty component, preparing the circuit board, and installing a new or repaired device, while maintaining the integrity of the printed circuit board.
Read more...Flexible three-process reflow soldering system Truth Electronic Manufacturing
Manufacturing / Production Technology, Hardware & Services
By combining multiple soldering technologies within a single system, the Vision TripleX system enables manufacturers to adapt easily to different assembly requirements, board designs, and production volumes.
Read more...Inline vapour phase soldering for high-volume production MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
The VP2200-100 vacuum inline vapour phase soldering system from ASSCON is designed for fully automated, high-volume electronics manufacturing where process consistency and solder joint quality are critical.
Read more...Global electronics solutions since 1964 IMP Electronics Solutions
Manufacturing / Production Technology, Hardware & Services
Over more than six decades, IMP Electronics Solutions has built a reputation for technical expertise, reliable supply chains, and strong partnerships with both customers and manufacturing partners.
Read more...Driving excellence in electronics manufacturing Jemstech
Editor's Choice Manufacturing / Production Technology, Hardware & Services
Jemstech’s reputation for disciplined execution and client-focused service has earned it strong loyalty from companies operating in demanding industries.
Read more...When do you need Nitrogen in reflow? Truth Electronic Manufacturing
Manufacturing / Production Technology, Hardware & Services
Nitrogen in reflow soldering is often seen as a performance enhancer, offering improved wetting, shinier joints, and fewer defects. But it is not always necessary.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version