DSP, Micros & Memory


Small-scale micro developed for cost-sensitive applications

27 March 2002 DSP, Micros & Memory

The ST7FLITE0 is the first in a new sub-family of ST7 microcontrollers from STMicroelectronics. It extends the lower end of the ST7 range, designed to fit applications with state-of-the-art features in a very small package. ST7FLITE0 8-bit MCUs are loaded with cost-saving extras, including a high-accuracy RC oscillator in place of an external resonator. The trimmable internal low voltage detector eliminates the need for external power-on and brown-out management circuits. With this and a selection of powerful I/O capabilities, the ST7FLITE0 can help designers' overall board costs significantly.

Main features

* 1,5K Flash memory with 20-year retention, 10K cycles endurance.

* 128 bytes data E2PROM with 20-year retention, 300 K cycles endurance.

* 8-bit A/D converter with operational amplifier for low level zooming.

* Standard ST7 8-bit core with up to 8 MHz internal clock.

* Low voltage detector with three programmable threshold levels.

* Auxiliary voltage detector with interrupt capability.

For further information contact Electrocomp (Value-Added Reseller), 011 458 9000.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

EERAM memory solutions retain data at power loss
29 January 2020, Avnet South Africa , DSP, Micros & Memory
Microchip Technology announced a new family of Serial Peripheral Interface (SPI) EERAM memory products that offers system designers up to 25% cost savings over the current serial non-volatile ram (NVRAM) ...

Read more...
32-bit Arm microcontrollers
29 January 2020, Hi-Q Electronics , DSP, Micros & Memory
Renesas Electronics unveiled the Renesas Advanced (RA) family of 32-bit Arm Cortex-M microcontrollers (MCUs). They deliver a combination of optimised performance, security, connectivity, peripheral ...

Read more...
Low-profile pressure transmitters
29 January 2020, Electrocomp , Analogue, Mixed Signal, LSI
TDK has expanded its portfolio with new EPCOS pressure transmitters whose performance profiles are specially tailored to the requirements of Industry 4.0. These low-profile pressure sensors are characterised ...

Read more...
Transient voltage supressor diodes for automotive
29 January 2020, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model 15KPA-SD-Q transient voltage suppressor diode series. This series was designed for use in DC bus clamping applications and for the protection of sensitive electronic ...

Read more...
Dual-channel protectors for high-speed data lines
29 January 2020, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model TBU-DF055-100-WH, TBU-DF055-200-WH, TBU-DF085-100-WH and TBU-DF085-200-WH bidirectional, dual-channel, High-Speed Protectors (HSPs) for use in data line protection. The ...

Read more...
Industrial enclosure catalogue
29 January 2020, Electrocomp , Technical Literature
The new industrial enclosures catalogue from Hammond Manufacturing brings together its most popular families in an easy-to-use shortform catalogue. The catalogue gives full technical details and part ...

Read more...
NXP further expands LPC5500 MCU family
25 November 2019, EBV Electrolink , DSP, Micros & Memory
NXP Semiconductors announced the availability of its LPC552x/S2x microcontroller (MCU) family, further extending its efficient LPC5500 MCU series with the second of seven families planned for the series. ...

Read more...
Automotive-qualified TVS diodes
25 November 2019, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model 15KPA-SD-Q transient voltage suppressor diode series. This series was designed for use in DC bus clamping applications and for the protection of sensitive electronic ...

Read more...
Handheld cold plasma device for surface treatment
EMP 2020 Electronics Manufacturing & Production Handbook, Electrocomp , Manufacturing / Production Technology, Hardware & Services
The Relyon Plasma Piezobrush PZ2 has nozzle attachment options for surface activation across a wide range of applications for improved adhesion on surfaces that are otherwise difficult to bond, print ...

Read more...
Robust DC link capacitors
25 November 2019, Electrocomp , Passive Components
TDK’s new B2568* series of EPCOS MKP DC link power capacitors offer high robustness under harsh environmental conditions. The new capacitors are designed for voltages of between 900 and 3000 V d.c. and ...

Read more...