mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Resettable fuses for 90 V operation
27 March 2002, Circuit & System Protection

Bourns has added the 90 V family to its Multifuse product line - part numbers MF-R055/90, MF-R055/90U, and MF-R075/90U. The 90 V series was introduced to meet applications that need to handle up to 90 V continuously.

This 90 V product provides resettable overcurrent protection for telephony applications including power passing taps, network interface units (NIUs) and set top boxes. The 90 V device is made of a unique conductive polymer that exhibits a positive PTC effect, which responds to increases in current by changing from a very low resistance state to a very high resistance state. This positive PTC effect provides overcurrent protection in circuits that operate in up to 90 V continuous.

The 90 V family is available in radial coated and uncoated devices, with kinked or straight leads. Packaging is available in bulk, ammo pack, or tape and reel.


Credit(s)
Supplied By: Electrocomp
Tel: +27 11 458 9000
Fax: +27 11 458 9034/5
Email: andrew@electrocomp.co.za
www: www.electrocomp.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • GNSS boards for dead-reckoning
    28 August 2019, Electrocomp, Telecoms, Datacoms, Wireless, IoT
    The Locosys RTK-4671-SHDR/MHDR is a high-precision GNSS RTK (global navigation satellite system real-time kinematics) solution targeting the smart driving and lane-level navigation markets. The newly ...
  • Rugged PFC capacitors
    28 August 2019, Electrocomp, Passive Components
    TDK’s DeltaCap X Black Premium is a new series of Epcos MKD capacitors for power factor correction (PFC). With rated voltages of between 440 V a.c. and 850 V a.c., the capacitors with an internal delta ...
  • Power inductors for LED headlights
    28 August 2019, Electrocomp, Passive Components
    TDK has expanded its lineup of metal core power inductors with the new SPM-VT series that is designed especially for the high thermal and current demands of automotive LED headlights. These wire-wound ...
  • EMI AC line filters for avionics
    31 July 2019, Conical Technologies, Circuit & System Protection
    Part of the AeroQor range, SynQor’s latest EMI AC line filters bring the company’s technology and manufacturing expertise to the avionics COTS component marketplace. The components’ packaging ensures ...
  • Ferrite magnetic design tool
    26 June 2019, Electrocomp, Passive Components
    The MDT software from TDK allows application-related parameters to be calculated for all available Epcos ferrite cores and/or materials. It provides access to digitalised material data including their ...
  • N-channel enhancement mode FET
    26 June 2019, Electrocomp, Power Electronics / Power Management
    Diotec Semiconductor’s 2N7002 is a widely used small-signal MOSFET in SOT-23 package. With an RDS(on) of maximum 2 Ω, the component offers a lower on-state resistance than the common industry standard. ...
  • Conductive rubber gaskets
    31 July 2019, Conical Technologies, Circuit & System Protection
    A range of conductive O-profile silicone rubber gaskets is available from Holland Shielding Systems, developed for high-performance shielding up to 18 GHz and used where environmental and EMI screening ...
  • High-speed fuses to protect critical power electronics
    31 July 2019, Altron Arrow, Circuit & System Protection
    Littelfuse high-speed (semiconductor) fuses protect critical power electronics from over-currents that may cause damage to electronic equipment. The company’s high-speed fuses are reliable, very fast-acting ...
  • Sealed enclosures for industrial electronics
    26 June 2019, Electrocomp, Enclosures, Racks, Cabinets & Panel Products
    Hammond Manufacturing has added 36 new configurations to its 1554 and 1555 sealed enclosure families for Industry 4.0. Available in ABS or polycarbonate with styled, opaque, clear or smoked lids, the ...
  • Vent panels for increased airflow and EMI protection
    26 June 2019, Actum Electronics, Circuit & System Protection
    Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...
  • Consumer grade power inductors
    26 June 2019, Electrocomp, Passive Components
    Bourns is introducing the Model SRP7028C, SRP1038C and SRP1770C high-current shielded power inductor series, designed to meet today’s high current density requirements in various types of consumer electronics ...
  • High-current shielded power inductors
    26 June 2019, Electrocomp, Passive Components
    The inductive components product line at Bourns has created the Model SRP5050FA and Model SRP7030CA high-current shielded power inductor series, designed to meet today’s high current density requirements ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.