Switches, Relays & Keypads


Pushbutton switches for harsh applications

27 March 2002 Switches, Relays & Keypads

APEM has expanded its range of IP series pushbutton switches for harsh environments. In addition to a variety of momentary action units, new latching action OFF-ON models have been added. These models provide the visual indication of the switch state with a 2-position actuator. When the switch is in the OFF position, the actuator projects noticeably higher than when the switch is in the ON position.

Compact in size, these switches mount in a 13,6 mm hole and their behind-panel depth is less than 20 mm. Their actuator is efficiently protected against mechanical shock. The IP series pushbuttons are available in round or square configurations, illuminated or nonilluminated, with seven actuator colours and provide modern cosmetic appearance to a front panel.

Sealing to IP67 is another important advantage offered with this series. An internal elastomeric membrane located under the actuator ensures this effective sealing.

The IP series models are recommended for applications desiring an ergonomic interface in electrical, electronic, medical, instrumentation and control equipment.

Main specifications: max current/voltage rating - 100 mA, 24 V d.c. with a life of 200 000 cycles or 2 A, 125 V a.c. with a life of 10 000 cycles (per UL 1054).



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

iCorp brings BeeLee’s compact switch and sensor components to local designers
iCorp Technologies Switches, Relays & Keypads
BeeLee’s product catalogue includes (among others) vibration sensors, tilt ball switches, reed switches, hall sensors, optocoupler (photo interrupter) devices, and liquid level switches.

Read more...
Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...
Next-gen modules for rugged edge AI systems
Altron Arrow Computer/Embedded Technology
Designed for real-world edge deployments where systems do not sit still, SolidRun’s P100 COMx6 series targets mobile platforms as well as harsh, mission-critical environments.

Read more...
NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
Exploring Bluetooth Channel Sounding
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.

Read more...
Dual-band Wi-Fi 6 companion module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
High-performance linear regulator
Altron Arrow Power Electronics / Power Management
The TI TPS7A57-Q1 is an automotive-grade, high-performance low-dropout linear regulator, engineered for precision power delivery in noise-sensitive systems.

Read more...
Quad RF ADC/DAC for wideband transceiver design
Altron Arrow DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved