Design kit for dimming compact fluorescents

8 May 2002 Power Electronics / Power Management

The IRPLCFL3 reference design is a ballast PCB design from International Rectifier that allows Compact Fluorescent Lamp (CFL) dimming in household light fittings using a standard 'hardware store' phase-cut triac dimmer. The reference design showcases the IR2156 ballast control IC.

Replacing incandescent light bulbs with compact fluorescent lamps can save up to 75% in energy consumption. A dimmable CFL gives consumers a way to save energy while maintaining the advantages of dimmable lighting. This is a single and cost-effective design kit that can help CFL ballast makers quickly take dimming CFLs to market without the investment and delay of designing an applications-specific IC.

This system uses a method that allows the ballast to operate with minimal flicker from maximum output down to approximately 10% brightness. It can be customised using International Rectifier's Ballast Design Software that can be downloaded from www.irf.com

Avnet Kopp

011 444 2333

sales@avnet.co.za

www.avnet.co.za

Further reading:

40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...

---

High-precision current transducer
Power Electronics / Power Management
Danisense announces its new high-precision DP12IP current transducer designed for isolated DC and AC current measurement in demanding PCB-mounted power electronics applications.

Read more...

---

Secure holder for protected 18650 batteries
Power Electronics / Power Management
Designed for protected 18650 batteries up to 70 mm long, the holder offers secure retention for portable, industrial, and embedded applications.

Read more...

---

More room to scale
Altron Arrow Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.

Read more...

---

Surface mount power amplifier for high-power applications
RF Design Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.

Read more...

---

1200 V QSiC modules
Power Electronics / Power Management
SemiQ Inc has launched the QSiC Dual3, a family of 1200 V half-bridge MOSFET modules for motor drives in data centre cooling systems, grid converters in energy storage systems, and industrial drivers.

Read more...

---

MCOTS transient filter for military applications
RFiber Solutions Power Electronics / Power Management
SynQor has announced the new MCOTS-F-28-T-HE transient half-brick filter, the latest addition to its MCOTS product family.

Read more...

---

Expanded range of high-thermal-performance QSiC modules
Power Electronics / Power Management
SemiQ’s half-bridge series for data centre power converters and industrial motor drives features low RDSON SiC MOSFETs and parallel SBD diodes for best-in-class power density and conversion efficiency.

Read more...

---

Transporting lithium batteries and IoT devices
Power Electronics / Power Management
With billions of rechargeable and non-rechargeable lithium cells and batteries powering most of the world’s consumer and industrial electronic devices, shipping them to customers through vast global logistics chains is often an overlooked topic.

Read more...

---

Setting a new benchmark for high-power DC load testing
Conical Technologies Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.

Read more...

---