Small and efficient high-frequency boost switcher has 5-12 V output
5 June 2002
Power Electronics / Power Management
Almost every portable instrument uses 2-cell alkaline or 1- to 2-cell Ni or Li batteries. With a typical operating output voltage range from 5 V to 12 V, these applications require a boost converter. Also, load conditions of circuits are becoming more complicated and more demanding on power. The load requires high-speed transient response, and the applicable PC board is restricted for real estate and height.
Analog Devices' ADP3031 is the company's first current-mode PWM boost converter. If one has an input condition from 2,5 V to 5,5 V and wishes to generate an output range from the input to 12 V with moderate output current, the ADP3031 can be a solution for such a requirement. In order to support high-speed transient response times, the PWM architecture is advantageous. Adjustable up to 2 MHz, at this frequency inductor size can be significantly reduced, and the input and output capacitors can be small MLCC types.
This fully integrated 1,5 A power switch offers simple compensation and is suited for applications such as portable electronics, instrumentation and TFT LCD biasing.
Further reading:
Rugged railway-grade DC-DC power modules
iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...
Four-quadrant regenerative grid simulator
Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...
90 W PSU with 150% boost capability
Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...
Standalone USB PD controller
Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...
Power module enhances AI data centre power density
Altron Arrow
Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.
Read more...
MIL-Spec DC-DC power converters
Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...
Compact power MOSFET for high current switching
Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...
DC link capacitors for demanding applications
RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...
N-channel power MOSFETs
TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
Read more...
Smart power protection, simplified
TRX Electronics
Power Electronics / Power Management
onsemi electronic fuses (eFuses) deliver integrated, intelligent protection by combining overcurrent, overvoltage, over-temperature, reverse polarity, and inrush current safeguards in a single compact IC.
Read more...