2,7 V RS232 transceivers

19 June 2002 Telecoms, Datacoms, Wireless, IoT

The ADM3310E is a three-driver/five-receiver serial port transceiver; the ADM3315E, has three drivers and three receivers-each meets EIA-232 standards while operating from a single power supply as low as +2,7 V. Both these Analog Devices ICs feature an on-board, charge pump voltage tripler and voltage inverter for internally generating positive and negative supplies from the power supply-eliminating the need for dual power supplies-and ±15 kV ESD protection on all I/O lines. In shutdown mode, two receivers in the ADM3310E remain active; one receiver remains active in the ADM3315E. Power consumption is minimised for each part via the Green Idle Mode, which facilitates the charge pump oscillator to gate on and off to maintain output voltage to ±6 V, regardless of the load conditions.

The ADM3310E and ADM3315E are suited to palmtop computer applications, PDAs and other portable/hand-held devices, mobile phone handset data cables, modems, and notebook PC peripherals.

Analog Data Products

011 531 1400

Further reading:

Mobile satellite connectivity available in SA
Telecoms, Datacoms, Wireless, IoT
Space42 has commercially launched its next generation mobile satellite service, Thuraya 4 NGS, available in South Africa as of February 2026.

Read more...

---

Next-gen Wi Fi 6E connectivity for embedded systems
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.

Read more...

---

Quectel redefines connectivity with RG660Qx 5G Series
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.

Read more...

---

Contactless IO-Link couplers
IOT Electronics Telecoms, Datacoms, Wireless, IoT
The IO-Link couplers from Phoenix Contact are industrial contactless couplers designed to transmit power and IO-Link data across a small air gap without physical connectors.

Read more...

---

Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...

---

SDRs – Which RF architecture should you choose?
RFiber Solutions Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.

Read more...

---

Multi-band GNSS patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.

Read more...

---

Cellular routers for explosive areas
Phoenix Contact Telecoms, Datacoms, Wireless, IoT
Updated versions of the Cellulink outdoor cellular router product range from Phoenix Contact are now available; they have been specially developed for use in Zone 2 potentially explosive areas.

Read more...

---

Power the next wave of IoT innovation
Links Field Networks Telecoms, Datacoms, Wireless, IoT
Links Field Networks’ portfolio includes connectivity platforms, edge devices, and network management tools designed to support secure, resilient IoT deployments across a range of use cases.

Read more...

---

Move to smart agriculture
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Designed for precision agriculture, the RAKwireless SensorHub is a modular, industrial-grade IoT platform that collects real-time environmental and soil data across farming operations.

Read more...

---