Passive Components

Inductive components

16 Feb 2000 Passive Components

Bourns is offering chip resistors that it claims deliver high quality and stability. With three- layer contacting process with nickel barriers, leaching is prevented and it provides excellent solderrability. Power ratings (at 70°C) of 0,1 W, 02,5 W an 0,25 W are available. The chip resistor arrays come in both isolated and bussed circuits. The extensive product line covers all standard resistances and tolerances.


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Chip capacitors for high capacitance and voltage
RS Components (SA) Passive Components
Multi-anode solid tantalum chip capacitors offer a high capacitance/voltage rating in a single package for power supply and power distribution applications.

Lowering the cost of solar PV inverters
EBV Electrolink Passive Components
Vishay has turned its attention to lowering the cost of solar PV inverters and by reducing the number of electrolytic capacitors required.

Miniature rotary switch series
Electrocomp Switches, Relays & Keypads
The high-quality miniature rotary switch series (MRSS) by TE Connectivity has a compact design which offers 50% lower profile than standard DIP switches.

TDK announces robust varistors with 14 mm disk diameter
Electrocomp Passive Components
The new AdvanceD series of varistors have a wide operating voltage range up to 625 V and offer a surge current capability of 3000 A.

Angle sensor for safety-critical applications
Altron Arrow Passive Components
TDK’s TAS4240 TMR-based angle-sensor enables precise angle measurements in applications where high performance is needed and space is limited.

Compact varistors offer surge capability of 6000 A
Electrocomp Circuit & System Protection
TDK has released the new EPCOS B72314S2* series of leaded disk varistors which cover a wide operating voltage range of 175 VRMS to 625 VRMS.

New high current through-hole inductors
EBV Electrolink Passive Components
Vishay has released a high current, through-hole inductor for use in high current and high temperature applications, DC/DC converters, high current differential chokes and inverters.

Short body USB-A with no compromise on performance
Electrocomp Interconnection
The all-new USB1125 connector from GCT with a minimal PCB footprint of just 13mm2 is 25% smaller than full-size equivalents.

Bourns releases new series of power inductors
Electrocomp Power Electronics / Power Management
Constructed with a magnetic-silica coating to the perimeter of the inductor winding to provide effective shielding, these inductors release lower magnetic field radiation compared to non-shielded inductors.

IP68 sealed enclosures from Hammond Manufacturing
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has introduced the 1551W series, IP68 sealed versions of its popular 1551 miniature enclosure family, in five initial sizes.