Hamamatsu Photonics has released several new back-thinned CCDs for low light level, analytical and biomedical measurements. The mega pixel S8667-1010 is a FFT (full frame transfer) back-thinned CCD, with 100% fill factor and extremely high quantum efficiency - typ in excess of 50% in UV and near IR and >90% in visible range. Back-thinned CCDs are made by chemically etching the back side of a CCD so that electrons may penetrate to the potential wells created on the other side. This 1024 x 1024 element BT-CCD, has 18 µm pixel size, giving a total active region of almost 19 mm square. Can operate with pixel clocks up to 14 MHz, making it suited for high-speed spectrometry (binning mode) or as a high frame rate camera. The high-speed amplifier offers readout speeds of up to 14 MHz pixel rate.
PhotoMOS relays Future Electronics
Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.
Read more...Mouser now shipping onsemi’s image sensors TRX Electronics
Opto-Electronics
The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array that can capture both continuous video and single frames.
Read more...Adaptive optics’ power solution Altron Arrow
Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.
Read more...Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.
Read more...High-speed lasers RFiber Solutions
Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime
Read more...High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...New generation of Ethernet media converters IOT Electronics
Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.
Read more...PIN photodiode with integrated lens RFiber Solutions
Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.
Read more...RGBIR sensor with I2C interface Electrocomp
Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.
printer friendly version