DSP, Micros & Memory


2-wire RTC with two time-of-day alarms

14 August 2002 DSP, Micros & Memory

Dallas Semiconductor's DS1339 serial realtime clock, a low-power clock/calendar with two programmable time-of-day alarms and a programmable square-wave output, also has dual power pins for primary and backup power supplies, and includes a programmable trickle charger. Address and data are transferred serially by a 2-wire serial bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The oscillator runs down to 1,3 V. The DS1339 operates over -40 to +85°C and is available in 8-pin microSOP package.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...
Robust LoRaWAN for distributed IoT
CST Electronics Telecoms, Datacoms, Wireless, IoT
InHand Networks has unveiled its latest LoRaWAN gateway, the EC312, marking an evolution in industrial-grade connectivity solutions for distributed IoT environments.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
ARINC 429 line driver evaluation board
ASIC Design Services DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.

Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.

Read more...
Lower-power Thread and BLE connectivity
iCorp Technologies DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.

Read more...
Touch-enabled 32-bit MCU
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...
Build smarter with UNO Q
Electrocomp Express DSP, Micros & Memory
The Arduino UNO Q’s hybrid design combines a Linux Debian-capable microprocessor with a real-time STM32U585 microcontroller making it the perfect dual-brain platform for the next innovation.

Read more...
Compact AI modules for imaging
Otto Wireless Solutions DSP, Micros & Memory
SIMCom has introduced two compact smart AI modules, the SIM8666 and SIM8668, designed to simplify the development of imaging-based IoT applications.

Read more...
Compact Renesas MCU rapid development board
Dizzy Enterprises DSP, Micros & Memory
Built around the Renesas R7FA4M2AD3CFP microcontroller, the Clicker 4 board provides engineers with a ready to use solution for prototyping and testing applications that require reliable ARM based processing and flexible expansion.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved