Opto-Electronics


Solderless LED connector

28 August 2002 Opto-Electronics

Available from Mimic Components the Conxrite (pronounced Con - x- rite) connector provides for a solderless connection for use with the VCC range of Cliplite panel indicator lenses.

The connector accommodates a 5 mm standard LED and provides external connection via either push-on or soldered wires. There are also versions with an in-built current-limiting resistor for operation of the LEDs up to 24 V.

The final assembly of Cliplite, the Conxrite connector and LED just clip together through the front panel. The Cliplites also offer up to 16 kV ESD protection from the front panel to the PCB.

For more information: Don Smith, Mimic Components, 011 493 5915, don@mimic.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Automotive LED drivers and controllers
29 January 2020, Future Electronics , Opto-Electronics
ON Semiconductor has launched a new family of four devices that facilitate the high levels of performance and innovative functionality that vehicle manufacturers and consumers now expect from automotive ...

Read more...
Photocouplers for industrial equipment and solar inverters
29 January 2020, Hi-Q Electronics , Opto-Electronics
Renesas Electronics announced five new 8,2 mm creepage photocouplers that are the world’s smallest isolation devices for industrial automation equipment and solar inverters. With a package width of 2,5 mm, ...

Read more...
Image sensor evaluation kits
25 November 2019, Future Electronics , Opto-Electronics
Ams has released the NanoVision and NanoBerry evaluation kits, which provide a ready-made platform for the development of innovative solutions based on the ams NanEyeC miniature image sensor. The NanEyeC ...

Read more...
VentoFlex modular LED lighting system
23 October 2019, Mimic Components , Opto-Electronics
Visual Communications Company (VCC) launched its VentoFlex flexible modular lighting system. The system is made up of flexible copper clad laminate (FCCL) sheets with 90 CRI Luxeon LEDs. VentoFlex was ...

Read more...
LED flicker, and how to prevent it
28 August 2019, Avnet South Africa , Opto-Electronics
With the growing popularity of LED lighting, especially now that very cheap LED luminaires are coming to the market, flicker is becoming more of a problem. Flicker, a repetitive switching on and off ...

Read more...
Digital fibre-optic sensor
28 August 2019, Vepac Electronics , Opto-Electronics
The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides. The slim-line housing with protective lid will fit in a variety ...

Read more...
All-in-one light pipe system
28 August 2019, Vepac Electronics , Opto-Electronics
Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed. The all-in-one adaptor system is built with optimum ...

Read more...
High-intensity colour LEDs
31 July 2019, Würth Elektronik eiSos , Opto-Electronics
Würth Elektronik has expanded its LED portfolio with a particularly compact model family. The WL-SMCC series of SMT chip LEDs, available in 0402 and 0603 packages, is characterised by a full-surface lens ...

Read more...
RGB LEDs for decorative lighting
26 June 2019, Würth Elektronik eiSos , Opto-Electronics
Würth Elektronik’s new WL-SFTW and WL-SFTD series of RGB LEDs are targeted at accent and decorative lighting, optical displays as well as industrial applications. Thanks to their PLCC contacting design, ...

Read more...
4,3” TFT LCD module
26 June 2019, iCorp Technologies , Opto-Electronics
The RFE430W-AYW-DNN from Raystar is a 4,3” TFT display with a resolution of 480 x 270 pixels. It has a built-in SC7283 driver IC and supports an RGB 24-bit interface, with brightness of 500 nits, an aspect ...

Read more...