Tyco's K-S Power Relay series is a 40 A class that features high-current design, ie, very high switching at continuous currents, and a very low voltage drop. Typical applications are for glow-plug circuits, engine cooling fans, heating elements, and starter solenoid switches.
In an open design the K-S weighs around 19 g. Nominal voltage is 12 or 24 V while other voltages are available on request. Contact configuration is Form A and contact material AgNi0.15. Max. switching current is 300 A (on) and 70 A (off). Limiting continuous current at 23°C is 70 A and at 85°C is 50 A. Voltage drop (initial) at 10 A is 10 mV typ. Mechanical endurance (no load) is 106 operations.
Nominal power consumption of the unsuppressed coil is 2,25 W. It has terminals for direct assembly in printed circuit boards.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Stainless steel pushbutton enclosures Electrocomp
Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.
Read more...SMD varistors with huge surge current capability Electrocomp
Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.
Read more...Sealed tantalum capacitors Electrocomp
Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...New series of chip-type capacitors Electrocomp
Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.
Read more...SMD coupled inductors Electrocomp
Passive Components
TDK Corporation has expanded its family of flat wire inductors with the high-performance EPCOS ERUC23 coupled inductor series.
Read more...Corrosion-resistant GRP enclosures Electrocomp
Enclosures, Racks, Cabinets & Panel Products
The design offers better impact resistance, and all sizes have the additional feature of shelves moulded into the base, fitted with threaded inserts to house a PCB or other electrical equipment.
Read more...Millimetre-accurate ultrasonic ToF sensor Electrocomp
Telecoms, Datacoms, Wireless, IoT
InvenSense’s SmartSonic family of ultrasonic ToF sensors integrate a MEMS piezoelectric micromachined ultrasonic transducer with an ultra-low power SoC in a miniature reflowable package.
printer friendly version