Switches, Relays & Keypads


Mini ISO plug-in relays

25 September 2002 Switches, Relays & Keypads

Tyco's mini ISO power relay F4 features limiting continuous currents 60/40 A at the NO/NC contacts. Typical applications for these are: ignition lock, lamp load (headlights); cooling fan; ABS; exhaust emission control; cross carline up to 60 A, etc.

The dimensional characteristics and the functional allocations of the plug-in terminals are to ISO 7588 standard and they come with plug-in or PCB terminals. The dustproof design has protection class IP54 to IEC 529 (EN 60 529) and has either mounting bracket or mounting clip options. The relays weigh approximately 35 g and nominal voltages are 12 or 24 V (other voltages available on request).

Terminals are either for PCB or as quick connect terminals similar to ISO 8092-1 (coil and load 6,3 x 0,8 mm). Surfaces are tin-plated.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Stainless steel pushbutton enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.

Read more...
SMD varistors with huge surge current capability
Electrocomp Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.

Read more...
Miniature SIP reed relay with 5 kV stand-off capability
Switches, Relays & Keypads
Pickering Electronics has added a 5 kV stand-off, up to 1,5 kV switching version to its single-in-line Series 104 reed relay family.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...
Analogue front end for sensor measurements
Electrocomp Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.

Read more...
New series of chip-type capacitors
Electrocomp Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.

Read more...
SMD coupled inductors
Electrocomp Passive Components
TDK Corporation has expanded its family of flat wire inductors with the high-performance EPCOS ERUC23 coupled inductor series.

Read more...
Corrosion-resistant GRP enclosures
Electrocomp Enclosures, Racks, Cabinets & Panel Products
The design offers better impact resistance, and all sizes have the additional feature of shelves moulded into the base, fitted with threaded inserts to house a PCB or other electrical equipment.

Read more...
Millimetre-accurate ultrasonic ToF sensor
Electrocomp Telecoms, Datacoms, Wireless, IoT
InvenSense’s SmartSonic family of ultrasonic ToF sensors integrate a MEMS piezoelectric micromachined ultrasonic transducer with an ultra-low power SoC in a miniature reflowable package.

Read more...