Switches, Relays & Keypads


Fast analog switches

9 October 2002 Switches, Relays & Keypads

Intersil's four high-performance analog switches, the ISL5120/1/2/3/4 offer low on resistance (19 Ohm) and fast switching times (28/20 ns, Ton/Toff) for switches in the +15 V maximum range. Industry-standard switches in this range typically have ON resistances of 30 Ohm and higher and switching times of 35/25 ns and higher. These +2,7 to +12 V (+15 V max) single-supply switches are available in dual single-pole single-throw (SPST) or single-pole double-throw (SPDT) configurations in small SOIC or smaller SOT-23 packages. Other features include a wide bandwidth for high frequency applications, and very high OFF isolation and cross-talk rejection. Signal response is consistently flat even past 300 MHz, over a wide voltage range, and stable for varying analogue signal levels. At 1 MHz, OFF isolation is greater than 70 dB in 50 W systems, decreasing approximately 20 dB per decade as frequency increases.

Memec SA, 021 674 4103

Avnet Kopp, 011 809 6100

EBV-Electrolink, 021 421 5350



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact low-power 32-bit platform
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...
Edge AI improves condition monitoring
EBV Electrolink AI & ML
STMicroelectronics has introduced the IIS3DWB10IS, an intelligent MEMS vibration sensor designed for high-performance industrial condition monitoring applications.

Read more...
Industrial time-of-flight proximity sensor
EBV Electrolink Opto-Electronics
STMicroelectronics’ VL53L4ED is a compact, high accuracy time-of-flight proximity sensor designed for industrial and embedded applications that require precise short range distance measurement.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...
High-performance SSD storage
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
Targeting the performance segment, the new KIOXIA XG10 Series leverages PCIe 5.0 technology to significantly elevate speed and responsiveness across data-intensive client applications.

Read more...
Next-gen robotic systems initiative
EBV Electrolink Design Automation
EBV Elektronik recently introduced MOVE – Driving Robotics Forward, a new initiative designed by EBV Elektronik‘s Embedded Solutions team to support the development of next-generation robotic systems.

Read more...
Compact high-current power inductor
EBV Electrolink Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.

Read more...
iCorp brings BeeLee’s compact switch and sensor components to local designers
iCorp Technologies Switches, Relays & Keypads
BeeLee’s product catalogue includes (among others) vibration sensors, tilt ball switches, reed switches, hall sensors, optocoupler (photo interrupter) devices, and liquid level switches.

Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.

Read more...
Touch-enabled 32-bit MCU
EBV Electrolink DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved