Case systems for mobile data collection
20 November 2002
Manufacturing / Production Technology, Hardware & Services
The medium version M of OKW's robust DATEC-MOBIL-BOX range of cases can now also be ordered in a 15 mm higher version. This range of handheld models is particularly suitable for self-contained control units for mobile data collection and transmission.
This higher DATEC-MOBIL-BOX M is available in two versions: Version I has a closed operating panel, while Version II includes a display window for standard LCDs with 2 lines x 16 characters. External dimensions are 195 mm in length, 101 mm in width and 69 mm in height.
This range of cases was designed in three pieces (upper part, lower part and battery compartment cover) in the two standard colours off-white (RAL 9002) and black (RAL 9005). The upper part is connected to the lower part by means of 4 self-tapping screws on the underside of the case, and the battery compartment is connected with two M3 threaded screws.
Generous flat surfaces allows opportunities for interfaces and openings. The dialogue panel is recessed by 1,7 mm for membrane keyboards and operating elements. IP 65 protective standard can be achieved by an optionally available set of seals. A tilt-foot bar is also available. For normal battery operation, 3 different battery compartments are available: for 4 x 1,5 V AA batteries as well as for one or two 9 V flat batteries (PP3).
For more information contact Avnet Kopp, 011 809 6100, [email protected], www.avnet.co.za
Further reading:
Outscale your competition
Manufacturing / Production Technology, Hardware & Services
Attendees will be able to explore the benefits of AMD Kintex UltraScale+ Gen 2 FPGAs in high-performance Pro AV, test & measurement, industrial, and medical applications.
Read more...
MTN SA Foundation drives youth pathways into the digital economy
Manufacturing / Production Technology, Hardware & Services
The MTN SA Foundation, in partnership with Helios Towers and Datacomb Development Hub, has launched the MTN–Helios Towers 12-month ICT Learnership Programme, a pathway that takes young South Africans from digital training into real workplace experience.
Read more...
Downstream demand, system reliability, and the expanding role of engineering-led distribution
Manufacturing / Production Technology, Hardware & Services
[Sponsored] As South Africa’s semiconductor demand continues to be shaped by downstream system deployment rather than upstream fabrication, the importance of engineering-led distribution will continue to grow.
Read more...
The impact of harsh environments and ionic contamination on post-reflow circuit assemblies
MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
There is well documented historical proof that post-reflow circuit assemblies, when subjected to harsh environments, are particularly vulnerable to failure mechanisms, but modern electronic assemblies are far more susceptible to this phenomenon.
Read more...
Engineering copper grain structure for high-yield hybrid bonding in 3D packaging
Testerion
Editor's Choice Manufacturing / Production Technology, Hardware & Services
The way copper grains are sized and distributed forms the metallurgical foundation of hybrid bonding, enabling lower bonding temperatures, greater reliability, and stable grain structures throughout integration.
Read more...
Understanding solder dross: causes and control strategies
Truth Electronic Manufacturing
Editor's Choice Manufacturing / Production Technology, Hardware & Services
Dross formation is an inevitable consequence of wave soldering. It occurs when molten solder comes into contact with oxygen, forming metal oxides that float on the surface of the solder bath. Over time, this oxidation byproduct accumulates and must be removed to maintain solder quality and process consistency.
Read more...
Non-destructive techniques for identifying defects in BGA joints – TDR, 2DX, and cross-section-SEM comparison
MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
This whitepaper reports the results of a comparison of the following techniques: TDR, automatic X-ray inspection (AXI), transmission X-ray (2DX), cross-section/SEM, and Dye & Pry.
Read more...
Implications of using Pb-free solders on X-ray inspection of flip chips and BGAs
MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
With the move to Pb-free soldering, most of the attention has been paid to reflow temperatures, component compatibility, and reliability concerns, but the implications for inspection, particularly X-ray inspection, are equally important and often underestimated.
Read more...
The causes of solder balls in robotic soldering
Manufacturing / Production Technology, Hardware & Services
Solder balls (also known as solder splatter) are a major concern in many production sites as they may potentially cause shorts, leading to long-term impacts on product reliability.
Read more...
Material challenges for superconducting quantum chips
Manufacturing / Production Technology, Hardware & Services
To achieve the scalable and repeatable production of superconducting circuits for quantum technology products, players in the industry are leveraging semiconductor fabrication techniques.
Read more...
printer friendly version