Non-contact voltage detector for field service engineers

12 March 2003 Test & Measurement

The Toptronic type T475 voltage detector is a small pocket-size instrument which can provide an essential service for the engineer in the field. When presented to the outside of a cable, or even close to a cable, it will give immediate indication as to whether or not the cable is alive.

According to the distributor, HellermannTyton, the T475 can detect voltages and currents even through armoured cable and indicate the presence of a voltage and emit an audible signal. This latter feature is useful for electrical engineers operating in plant areas and underground. The instrument can be worn on the belt and will emit an audible signal if a live voltage is relatively near the operator. Very sensitive, it will indicate when a voltage or current is present by a flashing LED and audible signal, when it is within the range 5 to 250 V. For HV environments, the instrument will simply indicate that the voltage is higher than 250 V.

HellermannTyton also markets the T40 HV probe suitable for up to 40 kV d.c. or peak AC.

For more information contact HellermannTyton (Instrument Sales), 011 879 6653.

Further reading:

Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...

---

Compact vector network analyser
Vepac Electronics Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.

Read more...

---

Smart digital fibre sensor
Avnet Abacus Test & Measurement
Panasonic Industry Europe has introduced the new FX-250 digital fibre sensor designed to support users in their daily working routines as effectively as possible.

Read more...

---

Compact USB spectrum analyser solution
Vepac Electronics Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.

Read more...

---

B&K Precision’s Series 1820B frequency counter
Comtest Test & Measurement
These compact and versatile instruments are designed for a wide range of frequency measurement applications, from telecommunications to verification and validation of oscillators.

Read more...

---

How transition-edge sensors detect microwave radiation
Test & Measurement
The elegant interplay of superconductivity, thermal physics, and precision electronics makes TES technology a cornerstone of modern low-energy photon detection.

Read more...

---

Compact high precision magnetometer
Future Electronics Test & Measurement
Bosch Sensortec has introduced the BMM350, a compact 16-bit, 3-axis magnetometer engineered to deliver high accuracy, low noise, and exceptional energy efficiency in space constrained designs.

Read more...

---

Ultra compact NTC thermistors
RS South Africa Test & Measurement
Murata Manufacturing Co. has expanded its compact NCU03 series of NTC thermistors with two ultra-small 0603M devices tailored for consumer and automotive designs.

Read more...

---

Omniflex uses LoRaWAN to track water usage
Omniflex Remote Monitoring Specialists Test & Measurement
Omniflex has helped New South Wales Ports improve its ability to track water usage by installing remote monitoring to 38 water meters at its Port Kembla site, sending the data to the NSWPorts web portal.

Read more...

---

Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...

---