Circuit & System Protection


EMI filter bank for power and control lines

26 February 2021 Circuit & System Protection

Atlanta Micro's AM35 provides six filters in a tiny 1,5 x 3 mm DFN package for filtering power and control lines necessary for spurious signal suppression for amplifiers, step attenuators, tuneable filters, and switches. It provides 50 dB of rejection up to 40 GHz and a low RC time constant for fast switching speeds.

The device offers simplicity and space savings compared to a traditional discrete design approach and provides one power line filter and five control line filters spaced at 0,5 mm pitch to mate perfectly with standard QFN devices. The discrete approach uses 29 passive components versus 2 with the AM35. In comparison to the traditional discrete approach, using the AM35 offers advantages in reduced size, complexity, and improved reliability.

Additionally, the AM35’s ability to reject signals up to 40 GHz is unlikely to be achieved with the discrete approach due to coupling and parasitics.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
Clearing the Static: Staying grounded: Ensuring effective ESD control
Actum Electronics Circuit & System Protection
To maintain reliable electrostatic discharge control, regular testing and accurate measurement are essential, with grounding products and ESD testing equipment being vital.

Read more...
PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...
Clearing the Static: ESD component safety in storage and transportation
Actum Electronics Circuit & System Protection
Conductive containers create a Faraday cage effect, safely channelling electrostatic charges away from the components inside.

Read more...
High-power radar band amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The MAPC-A4032 is a Gallium Nitride (GaN) amplifier designed specifically with high efficiency and high power for the 2,75 – 3,75 GHz S-Band radar band.

Read more...
2500 W GaN on SiC amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Macom’s recently released CGHV1420KF is a 2500 W package, partially matched amplifier utilising a high performance, GaN-on-SiC production process.

Read more...
Direct RF-sampling at microwave frequencies
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Jariet Technologies’ vision for its RF-sampling transceivers at microwave frequencies is to move the sampling to the antenna frequency.

Read more...
Multi-channel SMPS cable assemblies
RFiber Solutions Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.

Read more...
Quad-channel 16-bit converter
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The ARF0468 from Advance RF is a quad-channel mixed-signal processing chip, with each channel comprising three major functional modules: ADC/DDC/DDS.

Read more...
Clearing the Static: Conductive foot, heel and shoe grounders
Actum Electronics Circuit & System Protection
Conductive foot, heel and shoe grounders are used in electrostatic discharge protected areas to provide a path to ground for static electricity.

Read more...