EA’s flexible high-power DC supplies and electronic loads are integrated into 19-inch rack power supply or closed cabinet solutions and can be cost-effectively adapted to a wide variety of user requirements, thanks to their modular design and the standardised power and protection modules employed.
The 19-inch rack power supply or cabinet system can be designed as pure DC sources with power supplies, or as pure sinks with electronic loads. Furthermore, the power supplies can be conventional or bidirectional and the loads can be conventional or regenerative for a mix of source and sink capability. High power density units can be easily paralleled up to 1,92 MW in output, with up to 2000 V d.c.
The DC rack power supply and electronic loads each feature a 5-inch TFT touch panel display for intuitive control, setup and programming. The intelligent interface allows you to program and test quickly without the need for extensive manual review.
True auto ranging – advantages for test
All EA power supplies provide true auto ranging, giving full power across a larger operating range to test more devices with just one supply. Auto ranging enables the power supply to automatically adapt to higher output voltages when there is a smaller current, or handle higher currents when there is a lower voltage. EA’s true auto ranging can deliver full power down to 33% of rated output voltage.
Regenerative energy recovery
The PSB Series DC power supply is bidirectional, meaning it can source (provide) or sink (absorb) current and regenerate that current to the local power grid with up to 96% efficiency. Likewise, the ELR Series DC electronic load is regenerative, with the same energy recovery performance. This makes either solution an environmentally friendly choice on top of minimising investment and test equipment space.
Swappable Anybus remote control
EA ‘Anybus’ modules are easily installed by the user and can be swapped out in just a few minutes with a screwdriver when different communication protocols are desired. For computer or remote control, the choices include Ethernet, USB, EtherCAT, ProfiNET, ProfiBUS, CAN, CANOpen, Modbus, DeviceNet and RS-232 interfaces.
Finding value for money with your IoT battery Uniross Batteries
Power Electronics / Power Management
Designing an IoT application involves a lot of choices. Designers are looking for performance and quality, but need to balance those alongside a low Total Cost of Ownership.
Read more...Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...Versatile outdoor waterproof connectors Vepac Electronics
Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...Rugged AI PC for industry Vepac Electronics
AI & ML
Designed to operate where conventional systems fall short, the TB-7145-MVS compact industrial PC supports advanced machine inferencing, real-time data handling, and high-performance graphics workloads without compromise.
Read more...You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version