Recom has introduced two new cost-effective DC/DC products with outputs of 100 W and 300 W in a DOSA-compatible, low-profile, through-hole eighth-brick format (58,4 x 23 mm).
The RPA100E-W 100 W part has a wide 4:1 input range of 16-72 V for nominal 24 V, 28 V and 48 V supplies and fully regulated 5 V and 12 V trimmable outputs are available. Full power is available up to 50°C ambient in natural convection and to +85°C with forced air. Isolation is 1,5 kV d.c./1 min, basic grade.
The RPA300E 300 W part has an input range of 36-75 V for nominal 48 V supplies and features an output trimmable over a wide range of 16-35 V. Isolation of this part is 2,25 kV d.c./1 min, basic grade. The RPA300E has an integrated heat spreader that allows direct screw-fixing to a heatsink or cold wall. Full-load operation of this part without heatsinking is up to 60°C with forced air and up to 85°C with load derating.
Both product ranges have high power density with a typical efficiency of 94,8% (RPA300E) and 92% (RPA100E). High efficiency in excess of 90% is also maintained down to light loads, to suit applications with low standby loss requirements. The ranges include comprehensive protection against input under-voltage, short circuit, output over-current, over-voltage and over-temperature. Control features included are on/off control and remote sensing.
The RPA100E and RPA300E ranges are certified to UL/CAN/CSA 62368-1 safety standard for basic isolation and are compliant to EMC standard CISPR22 class B with an external filter.
The footprint of both parts is industry-standard DOSA-compatible, and the 100 W part is just 11 mm in profile while the 300 W part is 12,7 mm. Pin-out is also standard and compatible with quarter-bricks, allowing possible space saving in some applications without sacrificing power rating.
Quality batteries are critical for IIoT Uniross Batteries
Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.
Read more...12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.
Read more...40 W and 75 W railway DC/DC converter Brabek
Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.
Read more...Power modules for solid-state transformers RS South Africa
Power Electronics / Power Management
Microchip’s new 3,3 kV silicon carbide modules deliver the required thermal performance and efficiency for SSTs to increase power available for token generation.
Read more...Solving South African power problems with locally built intelligence
Editor's Choice Power Electronics / Power Management
Smart metering infrastructure in South Africa remains patchy. The rollout has been slow, coverage is inconsistent, and for the most part, granular per-unit measurement simply does not exist.
Read more...Wide range power module
Power Electronics / Power Management
The latest DC-DC modules from Würth Elektronik are characterised by high resilience to voltage transients on the 24 V bus and an extremely wide input-voltage range from 3,5 V to 38 V.
Read more...Selecting primary batteries for maximum service life Uniross Batteries
Power Electronics / Power Management
Primary batteries play an important role in IoT applications. Designed for longevity, they have a high-energy capacity and are often used in standalone applications where charging is impractical or impossible.
Read more...4 kW e-mobility DC-DC converter Brabek
Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.
Read more...Aluminium case upgrade boosts performance Vepac Electronics
Power Electronics / Power Management
The SQBF Quarter Brick 300 W DC to DC Converter is now available in a newly upgraded metal case designed to deliver improved durability and superior electrical performance across demanding applications.
Read more...Extending the range of power converters RS South Africa
Power Electronics / Power Management
Power Integrations recently announced a breakthrough in flyback topology extending the power range of flyback converters to 440 W - well beyond the limits that traditionally required more complex resonant and LLC topologies.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version