Bus Probe #05 (BP#05) is the newest member of Tibbo’s RS-485 Modbus sensor family. BP#05 implements a cost-effective, low-power flood/leak detector that is ideally suited for building management systems (BMS) and building automation systems (BAS). Just like its siblings, it comes in a durable, stylish and compact housing. The sensor implements a Modbus RTU protocol over a half-duplex RS-485 interface.
BP#05 works with a leak detection cable that reliably detects the presence of water and water-dissolved liquids. Unlike self-contained sensors that only detect the presence of water in their immediate vicinity, this cable – which can be up to 30 m in length – allows for guarding a large area. For example, the cable can be run along windowsills to safeguard against even minor leaks.
For added reliability and safety, the sensor features a -40°C to +85°C operating temperature range, inductor-less isolation of the detection circuit from its power and RS-485 bus, hot-swap protection and ±65 V fault and short-circuit protection for the RS-485 lines.
To simplify the configuration and maintenance of BP#05 and all other Tibbo bus probes, the Web485 board (WebUSB-to-RS-485) – coupled with the BP test web app – allows the user to upgrade BP firmware, set Modbus IDs, change the baud rate and poll and graph a sensor’s output – all from within a browser. This even works on Android smartphones, simplifying configuration and maintenance in the field.
ToF sensor with 6 m range Altron Arrow
Test & Measurement
Specifically designed for long-range, multitarget measurements, the VL53L4CX from ST Microelectronics provides very accurate distance measurements up to 6 m with excellent results over short distances.
Read more...Low power liquid detection for smart systems Future Electronics
Test & Measurement
Microchip Technology’s MTCH9010 Liquid Detection Turnkey Device is a compact, low power sensing solution designed to simplify reliable liquid detection in modern electronic systems.
Read more...Compact analogue phase shifter RF Design
Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits JSPHS-150+ is a compact analogue voltage-controlled phase shifter designed for narrowband RF applications between 100 and 150 MHz.
Read more...Integrated X-band radar front-end module RF Design
Telecoms, Datacoms, Wireless, IoT
Qorvo has introduced an X-band radar front-end solution that enables defence system designers to achieve higher performance without increasing size, weight or prime power.
Read more...Surface mount power amplifier for high-power applications RF Design
Power Electronics / Power Management
The GNA-63-5W+, from Mini-Circuits, is a GaN MMIC Power Amplifier (PA) designed for demanding RF applications requiring high efficiency, excellent linearity, and a compact footprint.
Read more...AI Experts provide product-specific intelligence Measuretest
Test & Measurement
VIAVI Solutions has announced AI Experts, the first addition to its NITRO AI portfolio of AI-driven capabilities with each Expert providing product-specific intelligence.
Read more...Rugged spectrum analyser Vepac Electronics
Test & Measurement
The HAROGIC PXR Series is designed for maximum durability and performance in the most demanding environments.
Read more...Setting a new benchmark for high-power DC load testing Conical Technologies
Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.
Read more...Locate underground cable faults faster with the Fluke AF2082 A-Frame Comtest
Editor's Choice Test & Measurement
Underground cable faults can lead to costly downtime, service disruptions, and extensive excavation if the fault location is uncertain. The AF2082 simplifies this process by guiding operators directly to the fault point.
Read more...Practical design strategies for 5G RF Design
Telecoms, Datacoms, Wireless, IoT
The Cavli CQM211 aims to provide a platform that combines strong 5G connectivity with onboard compute capability, as well as interface flexibility that suits both new designs and rapid migrations from earlier products.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version