Power Electronics / Power Management


Off-grid with a second life

28 February 2022 Power Electronics / Power Management

Revov is a local company specialising in selling batteries into various verticals, from industrial to residential. The batteries it sells are not the usual lead-acid batteries, but lithium iron phosphate (LFP) batteries.


Lance Dickerson.

Lance Dickerson, one of the founders of Revov, has many years of experience in the telecoms industry in various African countries where he learned the value of reliable batteries in areas where the electricity supply could not be relied upon to keep communications going 24x7.

On his return to South Africa, Revov was started as a distributor for BYD batteries. BYD is the largest manufacturer of electric vehicles and accessories in the world. These LFP batteries are used in a variety of vehicles, but reach the end of their working life (specifically their working life in vehicles, not the batteries; overall working life) after between 1500 and 1800 cycles. Since the batteries are designed for between 5000 and 7000 cycles, Dickerson saw an opportunity to sell what Revov calls second-life batteries into the local market. (The company also supplies new LFP batteries when required.)

Revov imports these batteries from BYD, tests and refurbishes them, placing them into more usable enclosures for the verticals it serves (mostly in 5 kWh or 10 kWh packages and can build configurations with up to 20 000 batteries) and distributes them through its channel partners. Batteries can be built into containers, which can be linked to provide up to 7200 kWh for more high-voltage applications.

Dickerson says the batteries should last for 10 years (or more), depending on use. If they complete a full cycle each day, that would be about 3650 cycles over 10 years, which they can easily handle.

Revov works with its resellers to make sure the batteries are installed correctly and deliver the best service when used with solar panels and other off-grid solutions – and it has the skills onboard to provide additional support if required. Naturally, the batteries don’t need to be used with solar or other renewable sources, but can be used during peak electricity hours and charged in off-peak hours. And of course, they are invaluable when Eskom breaks its toys and we end up with load-shedding.

Currently the cost of a solution is only slightly more than Eskom’s fees, but once the next round of increases occurs, the solution will actually be cheaper. With a return on the infrastructure investment in about five years, Dickerson says the numbers speak for themselves, with a 0,01% return rate over the past 42 months during which it has supplied around 110 MWh in total. Each battery has a warranty for 10 years or 3500 cycles.

Why LFP?

When asked why Revov’s LFP batteries would be a better choice than traditional lead-acid batteries, Dickerson offers a number of benefits. The first is temperature. While Revov’s batteries and lead-acid batteries cost about the same, the LFP systems operate at a higher ambient temperature (between 33°C and 35°C without degradation) as opposed to 25°C of lead-acid batteries.

This makes the 12 V options suited for outdoor perimeter security around farms and other remote areas, for example. The outdoor heat will reduce the lifespan of lead-acid batteries far faster than LFPs, making your battery investment last longer.

In addition, while discharging lead-acid batteries to less than 50% of their capacity can reduce the battery’s full lifespan faster, LFP batteries can use almost 100% of their capacity without such deterioration. Finally, LFP batteries are also smaller and weigh less.

Revov has a direct presence in Cape Town, Durban and Johannesburg from where it supports its South African partners and customers and it has partners in Namibia, Zimbabwe and Botswana.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

NVDC power-path control to 1– 6 cell battery systems
iCorp Technologies Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.

Read more...
Precise, adaptive battery health-monitoring
RS South Africa Power Electronics / Power Management
New fuel gauge solution from Nordic delivers State-of-Health reporting, adaptive battery modelling, and seamless fleet observability via nRF Cloud.

Read more...
Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...
The new role of UPS technology in high-precision automation
Omron Electronics Power Electronics / Power Management
OMRON’s BU_2SW and BU_2RWL series UPS systems are engineered to offer a robust, online type power architecture designed to safeguard sensitive AC powered systems across a wide range of industries.

Read more...
Rugged railway-grade DC-DC power modules
iCorp Technologies Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.

Read more...
Four-quadrant regenerative grid simulator
Conical Technologies Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.

Read more...
90 W PSU with 150% boost capability
Brabek Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.

Read more...
Standalone USB PD controller
Future Electronics Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
MIL-Spec DC-DC power converters
Vepac Electronics Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved