The XLamp XHP70.3 LEDs are the third generation of Cree’s extreme high-power-LED series. The new generation LEDs have improved optical performance versus the previous generations, and higher intensity through optics than the second generation.
Two types are available in the series. The ‘HD’ which has an on-die primary lens for high light outputs has an illuminated FoV of 120° and produces 5511 lm. The ‘HI’ has a narrower illuminated FoV of 115° and produces a slightly lower 5157 lm with no primary lens for high-peak intensity beamforming.
The LEDs measure 7 x 7 mm packages with four electrical connections allowing any of the devices to be connected in either 6 or 12 V nominal circuits, with a maximum drive current draw of 7,2 or 3,6 A respectively. A fifth, larger, copper pad on the base of the LED, with a nominal package resistance of 0,2°C/W, is where most of the generated heat will be extracted.
The LEDs are optimised for outdoor and lighting applications that require large amounts of light output from small luminaires, such as in stadiums, outdoor areas and for architectural spotlighting. By leveraging the XHP family advantages, lighting manufacturers can significantly reduce their system cost by using fewer optics, PCBs and heat sinks than is possible with standard LEDs.
Microchip expands maXTouch M1 touchscreen controller Altron Arrow
DSP, Micros & Memory
Microchip Technology has again expanded its maXTouch M1 family of touchscreen controllers, now covering free-form widescreen format displays up to 42 inches down to small compact screens in the 2 to 5 inch range.
Read more...ToF sensor with 6 m range Altron Arrow
Test & Measurement
Specifically designed for long-range, multitarget measurements, the VL53L4CX from ST Microelectronics provides very accurate distance measurements up to 6 m with excellent results over short distances.
Read more...Microchip expands its Arm Cortex-M0+ portfolio Altron Arrow
DSP, Micros & Memory
PIC32CM PL10 MCUs feature a rich set of Core Independent Peripherals, 5 V operation, touch capabilities, integrated toolsets, and safety compliance.
Read more...High-voltage X-Ray generators for advanced imaging Vepac Electronics
Opto-Electronics
X-ray has developed a high-performance range of HV generators designed for accuracy, long-term durability, and seamless integration into OEM environments.
Read more...More room to scale Altron Arrow
Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.
Read more...Multi-constellation GNSS module in a legacy-compatible footprint Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.
Read more...Compact SSI family for industrial automation Altron Arrow
Passive Components
Infineon Technologies has introduced the ISSI20BxxF Solid State Isolator (SSI) family, bringing solid-state isolation technology into high-volume applications traditionally served by photovoltaic isolators (PVIs), photovoltaic relays (PVRs), and electromechanical relays (EMRs).
Read more...Rev 2.0 PolarFire FPGA ethernet sensor bridge Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...Universal IR receiver module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Vishay Intertechnology has introduced a new series of infrared (IR) receiver modules for IR remote control applications, which feature a wide modulation frequency acceptance from 30 kHz to 68 kHz.
Read more...Low profile SMD antenna Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The Havok PCS.06.A antenna, from Taoglas, is a low profile SMD LTE/cellular 4G/3G/2G embedded antenna designed for direct SMD mount on a device PCB.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version