Now that the EU has approved the common charger law that will make it compulsory for all electronic devices sold in the EU to have an integrated USB-C port by 2024, manufacturers will be scrambling to make sure that devices comply. Although many laptop and smartphone manufacturers have already adopted the common charging connector, millions of consumer electronics still use proprietary connectors or the good, old barrel jack to receive power.
Infineon has come up with a way out. The EZ-PD Barrel Connector Replacement (BCR) controller is an ideal solution for replacing these legacy connectors with USB-C enabling any device to be powered by a USB-C charger, thereby meeting the requirements of the EU common charger mandate.
The EZ-PD BCR solution integrates all required components to provide a USB-C power consumer system-on-chip (SoC). The chip includes the complete USB-C interface, and the power delivery policy manager runs autonomously without the need for firmware development.
The highly integrated SoC contains several analog components, including a 30 V-tolerant LDO, PMOS gate driver and VBus discharge FET. The chip uses the 5 to 20 V VBus directly as power supply, eliminating the need for an external voltage regulator. The USB-C connector is protected by the solution with its on-chip over-voltage, under-voltage and over-current protection, and the VBus short-circuit protection. The SoC also conforms to IEC61000-4-2 to offer ESD protection.
The EZ-PD BCR chip is supplied in a 4 x 4 mm QFN package and supports an operating temperature of -40 to 105°C, meeting the operating range of the vast majority of consumer and industrial applications.
Powering the IoT Uniross Batteries
Power Electronics / Power Management
Choosing the right battery is not simply a technical detail, but a defining factor in the longevity and cost-effectiveness of any IoT deployment.
Read more...The move to DC infrastructure IOT Electronics
Power Electronics / Power Management
The shift toward direct current infrastructure in data centres is accelerating as operators pursue higher efficiency, improved reliability, and stronger alignment with renewable energy goals.
Read more...Next-gen robotic systems initiative EBV Electrolink
Design Automation
EBV Elektronik recently introduced MOVE – Driving Robotics Forward, a new initiative designed by EBV Elektronik‘s Embedded Solutions team to support the development of next-generation robotic systems.
Read more...Power inductor for automotive applications Würth Elektronik eiSos
Power Electronics / Power Management
The WE-MXGA inductor features RDC values up to 25% lower and a saturation current up to 47% higher compared to other components currently available on the market.
Read more...High-performance DC-DC converter Conical Technologies
Power Electronics / Power Management
With a wide 9 - 40 V DC input range, the Claf Power DWHB400-F24xxN series is a high-performance DC-DC converter family ideally suited for 12 V and 24 V battery-based systems including vehicles, off-grid installations, and distributed power architectures.
Read more...Compact high-current power inductor EBV Electrolink
Passive Components
Vishay’s IHLP series power inductors deliver high current capability in an ultra-low profile, magnetically shielded design.
Read more...DC-DC converters for next-generation IoT iCorp Technologies
Power Electronics / Power Management
AIPUPOWER’s K78XXJT-500R3 and K78XXJT-500R3-LB give designers a compact, high-efficiency power option for battery-powered and space-constrained systems, combining up to 96% efficiency with no-load input current as low as 0,2 mA.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...You cannot manage what you cannot measure
Power Electronics / Power Management
South African sites are generating solar energy. Most still have no idea what is consuming it… or when, or why. Intelligent load management hardware is changing that.
Read more...Scalable and intelligent power solution
Power Electronics / Power Management
Designed for Africa’s rapidly evolving energy landscape, Bluetti’s ES125 offers a scalable, intelligent power solution that delivers reliable and cost-efficient electricity for uninterrupted operations.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version