Mill-Max has announced a new lineup of spring-loaded pins available with either pointed or flat tip plungers.
These new pins expand the extensive offering of spring-loaded products, providing solutions for testing and other specialised connection requirements.
The standard full radius plunger tip, found on much of the product line, is an excellent choice for many uses, however, there are applications which require a different solution. The pointed tip plunger design is often used with spring-loaded pins in test environments. The point design concentrates the force, creating greater pressure to penetrate oxides or other contaminants on the surface of the test unit, thereby providing a high-quality, low-resistance connection. Another use for pointed tip plungers is for probing or contacting holes or via holes on printed circuit boards. The point provides a more suitable fit than a radius, and can be used in a variety of hole sizes.
Flat tip plungers provide greater surface area at the point of connection, distributing the electrical charge and delivering more efficient heat dissipation. An example use case would be to reduce the likelihood of arcing in systems that experience power spikes for a short duration, or to decrease the total amount of heat generated in a circuit. Other advantages provided by the flat tip plungers are that they allow for greater tolerance misalignment with mating surfaces, and they are a good choice for applications where the spring pin tip makes contact with round component leads.
Both the flat and pointed tip pins are available in surface mount and through-hole terminations, with six unique initial heights and two options for stroke. These pins are made with precision-machined components and beryllium copper springs, all gold plated to ensure the highest conductivity, corrosion resistance, and durability.
What’s the big deal with open pin fields? Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...Innovation in high-frequency cable design Spectrum Concepts
Telecoms, Datacoms, Wireless, IoT
[Sponsored] With frequencies approaching 110 GHz, a mismatch in impedance, an increase in insertion loss, or minute phase distortion can be the difference between success and failure.
Read more...New connector for Push-X technology Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.
Read more...Test cable designed for maximum ruggedness Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...Safe connection under load Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...Connectors for energy storage systems Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
printer friendly version