DSP, Micros & Memory


SiP supports LTE/NB-IoT and GNSS

30 April 2024 DSP, Micros & Memory

The nRF9151 from Nordic Semiconductor is an integrated System-in-Package (SiP) supporting LTE-M/NB-IoT, DECT NR+ and GNSS services. It supports the 700 to 2200 MHz LTE band and 1,9 GHz NR+ band.

This SiP has an integrated LTE-M/NB-IoT and DECT NR+ modem that enables global connectivity without regional limitations. It also supports 3GPP Rel-14 LTE-M/NB-IoT and DECT NR+ stack that enables massive mesh applications that prioritise reliability, secure connections, long range, and scalability.

The SiP delivers a Tx output power of 20dBm (power class 5) or 23 dBm (power class 3). The integrated 64 MHz ARM Cortex-M33 processor has 1 MB of Flash memory and 256 kB RAM. It is ideal for use in wearable devices, smart sensors, and other space-constrained IoT applications.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...
Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...
Axon NPU powers smarter edge
RF Design AI & ML
The nRF54LM20B from Nordic Semiconductor is an ultra-low-power wireless SoC that combines advanced edge AI capabilities with robust radio connectivity and rich peripheral support.

Read more...
Compact Ka-band GaN PA
RF Design Telecoms, Datacoms, Wireless, IoT
The CMX90A705 from CML Microcircuits is a high-performance two-stage GaN power amplifier operating across 27,5 to 31 GHz and targeting Ka-band applications.

Read more...
Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...
Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
ARINC 429 line driver evaluation board
ASIC Design Services DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved