The MAX77859 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring a wide input voltage range (2,5 to 22 V). The IC can supply up to 6 A of output current in buck mode and up to 4 A in boost mode (VIN = 3,7 V, VOUT = 5 V). The IC allows systems to change the output voltage dynamically through its I2C serial interface.
The MAX77859A features I2C-adjustable output current limit with resolutions of 50 mA/step (with 10 mΩ sense resistance) to support USB-C PPS requirements. The MAX77859B is a non-PPS version and is optimised for low quiescent current. Systems equipped with the MAX77859 can provide fast-charging peripheral devices with higher output voltage, minimising power loss across cable/connector and reducing charging time.
The IC operates either in SKIP mode or in forced-PWM (FPWM) mode, depending on the operating conditions, to optimise efficiency. The default output voltage is 5 V when using internal feedback resistors. The IC can also be configured to any default output voltages between 3 and 20 V when using external feedback resistors. The output voltage is adjustable dynamically (DVS) between 3,2 and 16 V in 20 mV steps when using internal feedback resistors or between 3 to 20 V when using external feedback resistors (with the step-size dependent on the external feedback resistor ratio) by programming the internal reference voltage through the I2C serial interface.
MAX77859A features output current limiting: Using a 10 mΩ sense resistor, the output current limit threshold is adjustable dynamically between 1 and 5 A in
50 mA steps via the I2C serial interface, with a 3 A default value.
ABB’s Mission to Zero drives South Africa’s energy transition ABB Electrification Products
Power Electronics / Power Management
ABB Electrification is charting a bold path towards a net-zero future with its Mission to Zero programme, a blueprint that combines energy efficiency, electrification, and digital innovation to accelerate the transition to clean energy.
Read more...Energy harvesting using a battery-less IoT system NuVision Electronics
Editor's Choice Power Electronics / Power Management
Energy Harvesting plays an essential role in the foundation of ambient IoT, a new generation of ultra-low power connected devices that operate by drawing energy from their environment instead of relying on traditional batteries.
Read more...Driving power, defining performance Future Electronics
Power Electronics / Power Management
Vishay’s portfolio of inductors, current sense resistors, and MOSFETs provides a comprehensive solution for intelligent power management.
Read more...Battery simulator module simplifies BMS testing Test Dynamics
Power Electronics / Power Management
The PXI/PXIe solution from Pickering Interfaces offers a scalable, modular design for faster development cycles, lower total cost of ownership, and improved safety.
Read more...DC PSU: The cornerstone for efficient solar-storage systems Vepac Electronics
Power Electronics / Power Management
PV energy storage systems are evolving and DC power supplies, with their technical characteristics that are naturally compatible with new energy, have become a key carrier for improving system energy efficiency.
Read more...Converter power modules for 48 V networks Altron Arrow
Power Electronics / Power Management
The economic and quality-of-life benefits of electrification is driving the adoption of HV to 48 V DC-DC conversion across many markets with 48 V power modules becoming more common.
Read more...Memory for asset tracking Altron Arrow
DSP, Micros & Memory
The Page EEPROM, ST’s latest memory, has been designed for efficient datalogging and fast firmware upload/download in battery-operated devices.
Read more...Microchip and AVIVA Links collaboration Altron Arrow
News
Microchip and AVIVA Links have achieved groundbreaking ASA-ML interoperability, accelerating the shift to open standards for automotive connectivity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version