With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit. Compared with the conventional winding inductor, the open magnetic circuit design is optimised to semi-magnetic shielding, which reduces magnetic leakage. This decreases the impact on other devices and lessens the noise of TWS earphones.
At the same time, the core material is optimised to effectively improve the current capacity. Compared with the open-circuit winding inductor, the saturation current is increased by >30% and the loss is reduced by nearly 30%. The dimensions of the MWPH series ranges from 1,0 x 0,5 mm to 1,6 x 0,8 mm, with an inductance range of 0,33 to 22 μH and a high Q and high SRF.
The MWPH series is widely used in consumer electronics and portable medical equipment, such as high-end mobile phones, TWS earphones, smart watches, bracelets, and pads.
NVDC power-path control to 1– 6 cell battery systems iCorp Technologies
Power Electronics / Power Management
SG Micro’s SGM41581 is an I2C-controlled narrow voltage direct charging buck boost charge controller designed to simplify robust power delivery in systems that must seamlessly operate from an adapter input or a battery pack.
Read more...Wi-Fi 7 tri-band connectivity module iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel has introduced the FCE870Q, a compact short range wireless connectivity module designed for next generation IoT devices that require high throughput, low latency, and reliable operation in dense wireless environments.
Read more...Lower-power Thread and BLE connectivity iCorp Technologies
DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.
Read more...Enabling the next generation of high-performance wireless designs iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its wireless connectivity portfolio with the introduction of the ESP32-E22, a high-performance connectivity co-processor designed for next generation embedded and IoT systems.
Read more...Tiny power inductor for low noise applications iCorp Technologies
Passive Components
With the evolution of Bluetooth, chips, sensors and other technologies, the design of TWS earphones is becoming smaller and thinner, and the performance and size requirements of integrated inductors need to follow suit.
Read more...Next-gen Wi Fi 6E connectivity for embedded systems iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.
Read more...Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Quectel redefines connectivity with RG660Qx 5G Series iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.
Read more...Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version