DSP, Micros & Memory


EEPROMs for industrial and military markets

30 May 2025 DSP, Micros & Memory


Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb for the industrial and military markets.

These EEPROMs have fully TTL and/or CMOS compatible inputs and outputs and are available in the Mil-temp temperature range of -55 to 125°C. They feature a data bus width of 8 bits, up to 120 ns access time, and feature special functions such as Software Data Protection.

The endurance is product dependant but ranges from 10 000 to 100 000 write cycles with data retention of 10 years or 100 years being available. Standard military drawings (SMDs) 5962-xxx are supported, and these MIL-STD-883 compliant devices are offered in hermetic ceramic packages to maintain the longevity of the host system.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...
Versatile outdoor waterproof connectors
Vepac Electronics Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.

Read more...
Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...
Rugged AI PC for industry
Vepac Electronics AI & ML
Designed to operate where conventional systems fall short, the TB-7145-MVS compact industrial PC supports advanced machine inferencing, real-time data handling, and high-performance graphics workloads without compromise.

Read more...
Compact vector network analyser
Vepac Electronics Test & Measurement
Siglent Technologies has introduced the SNA5000X-E Vector Network Analyzer, a compact, cost-effective solution engineered to meet essential RF testing needs, while maintaining dependable performance.

Read more...
Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...
Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...
Compact USB spectrum analyser solution
Vepac Electronics Test & Measurement
The HAROGIC SAN Series USB Spectrum Analyser is a compact USB-based spectrum analyser and receiver that covers a broad frequency range from 9 kHz up to 9 GHz.

Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved