Opto-Electronics


Mouser now shipping onsemi’s image sensors

30 May 2025 Opto-Electronics


Mouser is now stocking the AR0145CS Hyperlux SG image sensors from onsemi. The AR0145CS is a 1/4,3-inch CMOS digital image sensor with a 1280 (H) x 800 (V) active-pixel array. Capturing both continuous video and single frames, the AR0145CS sensors are ideal for scanning and industrial inspection applications.

These sensors offer sophisticated camera features, including auto exposure control, pixel binning, row- and column-skip modes, and windowing. An innovative global shutter pixel design allows the sensors to capture moving scenes with speed and accuracy. The integrated MIPI interface features 1 or 2-lanes at a resolution of 8- or 10-bits.

The AR0145CS image sensors include automatic black level calibration (ABLC) and produce clear, low-noise images in low-light and bright scenes. The sensors are programmable through a simple, two-wire interface and include an on-chip trigger mode for synchronisation, built-in flash control, and two on-chip phase lock loops (PLLs). With this combination of features, these sensors are suitable for a wide range of applications, including bar code scanners, gesture recognition, augmented reality, biometrics, surveillance, HD video, and machine vision.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PhotoMOS relays
Future Electronics Opto-Electronics
The AQY221R2SX and AQY221R2S PhotoMOS from Panasonic Industry ensures excellent characteristics and high-speed switching performance.

Read more...
Adaptive optics’ power solution
Altron Arrow Opto-Electronics
Vicor power-dense adaptive optical modules enable colossal telescopes to look into the past for deep space discoveries.

Read more...
Ultra-high speed photo detection
Opto-Electronics
TDK Corporation has announced a photo-spintronic conversion element combining optical, electronic, and magnetic elements that can respond at an ultra-high speed of 20 picoseconds.

Read more...
High-speed lasers
RFiber Solutions Opto-Electronics
Macom are a high-volume manufacturer of lasers, deploying more than 100 million devices with a reliability of less than 50 FIT and greater than 100 years of wear-out lifetime

Read more...
High-performance optical interconnect
Opto-Electronics
STMicroelectronics has unveiled its next generation of proprietary technologies for higher-performing optical interconnect in datacentres and AI clusters.

Read more...
Halo mid-board optical transceiver
Spectrum Concepts Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.

Read more...
New generation of Ethernet media converters
IOT Electronics Opto-Electronics
Phoenix Contact is introducing three new families of media converters to the market, each designed for specific industrial environments and challenges.

Read more...
PIN photodiode with integrated lens
RFiber Solutions Opto-Electronics
The MARP-BP112 from Macom is a backside-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, that is optimised for use in 112 GBaud PAM4 applications.

Read more...
RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...
The importance of contrast in fibre-optic sensing
Vepac Electronics Opto-Electronics
Contrast refers to the difference between the light signal that is transmitted through the fibre and the light signal that is received at the other end, and allows for the detection and measurement of small changes in physical parameters.

Read more...