The AD9084 from Analog Devices is a premier mixed-signal front-end data converter designed for the most demanding wideband applications. Marketed under the Apollo MxFE family, the AD9084 integrates a quad 16-bit RF digital-to-analogue converter (DAC) with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter (ADC) with a maximum sampling rate of 20 GSPS in a single, highly configured device. Its flexible reconfigurable architecture supports four transmitter and four receiver channels, enabling simultaneous transmit and receive processing across broad RF spectrums.
The AD9084 supports an RF analogue bandwidth up to 18 GHz and delivers up to 10 GHz of instantaneous bandwidth per channel (in 2T2R mode). The converter’s advanced DSP engine includes programmable FIR filters at full ADC/DAC rates, configurable fine and coarse digital down converters (DDCs) and up converters (DUCs), and a programmable fractional data-rate resampler. Multiple loopback modes and fast frequency hopping profiles make it ideal for dynamic systems needing rapid reconfiguration between wideband and multiband operational modes.
Connectivity is supported via high-speed JESD204B/C, while dynamic configuration is available through SPI, HSCI, GPIO, or external triggers. Built-in features such as low-latency loopback, spectrum sniffer and monitor functions, temperature monitoring, and power amplifier downstream protection deliver robust system-level performance.
Available in a compact 24 x 26 mm, 899-ball BGA, the AD9084 is recommended for new designs in state-of-the-art applications including phased array radar, electronic warfare, tactical defence radios, wireless communications infrastructure, and 5G/6G test systems.
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...GigaDevice expands GD25UF Series density NuVision Electronics
DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.
Read more...ARINC 429 line driver evaluation board ASIC Design Services
DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.
Read more...Highly integrated 24-channel mixed signal IC EBV Electrolink
DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.
Read more...Lower-power Thread and BLE connectivity iCorp Technologies
DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.
Read more...Touch-enabled 32-bit MCU EBV Electrolink
DSP, Micros & Memory
Microchip’s PIC32CM PL10 microcontroller family expands the company’s Arm Cortex-M0+ portfolio, delivering a compact, low-power 32-bit platform designed for cost-sensitive embedded applications.
Read more...Compact 6 A automotive buck converter Altron Arrow
Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.
Read more...Build smarter with UNO Q Electrocomp Express
DSP, Micros & Memory
The Arduino UNO Q’s hybrid design combines a Linux Debian-capable microprocessor with a real-time STM32U585 microcontroller making it the perfect dual-brain platform for the next innovation.
Read more...Next-gen modules for rugged edge AI systems Altron Arrow
Computer/Embedded Technology
Designed for real-world edge deployments where systems do not sit still, SolidRun’s P100 COMx6 series targets mobile platforms as well as harsh, mission-critical environments.
Read more...Compact AI modules for imaging Otto Wireless Solutions
DSP, Micros & Memory
SIMCom has introduced two compact smart AI modules, the SIM8666 and SIM8668, designed to simplify the development of imaging-based IoT applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version