News


Disposing of e-waste in space

25 March 2020 News

According to BBC, there are over half a million pieces of debris floating around the Earth’s orbit. Most debris within the atmosphere are lost parts from space crafts, disused rocket stages or waste from astronauts. The Earth is currently facing a climate emergency due to increasing greenhouse gasses, loss of natural resources and rising sea levels.

As of now, there are minimal laws on disposing waste into the atmosphere. Does this mean that we can solve all our waste problems by disposing them into space? Within this article, I am going to explain the advantages and disadvantages of disposing waste in space and whether it is becoming the latest e-waste landfill...

The Earth is quickly running out of waste storage which is causing numerous problems for wildlife – especially in the ocean. Many small marine animals consume waste in order to fulfil their hunger and survive. However, most of the waste which is consumed (such as plastic) is extremely harmful for the wildlife and decreases the species’ population. According to ‘Two Oceans Aquarium’, all seven species of endangered sea turtles get entangled or ingest plastic. As well as this, 50-80% of dead sea turtles have been found with plastic inside them. We humans generate around 40 million tons of electronic waste every year, according to ‘The World Counts’.

Can debris fall from space?

The answer to this is – yes! According to Nesdis, on average, a total of between 200-400 tracked objects enter Earth’s atmosphere every year. Most debris falling from space is either burnt during the transition from space to earth or disintegrate through the atmosphere.

Dangers of disposing e-waste into space

Let’s start with human dangers of disposing waste into space. Every year, only a few astronauts get the opportunity to travel into space due to the cost and safety restrictions. If there were masses of debris (waste) within the atmosphere, astronauts would be in danger because their suits aren’t designed to protect them from debris traveling at moderate speeds. According to NASA, space waste can reach speeds of 29 000 kilometres per hour. Therefore, if debris was to collide with other debris, it could potentially create more debris from impact which could cause more hazards to astronauts.

Another danger of disposing e-waste into space would be the debris colliding with satellites, causing a loss of cellphone communications, GPS, Internet and coordinated airfare. Currently, there are about 4700 satellites still in space, but only an approximate 1800 are still working. One of these 1800 satellites could become damaged due to e-waste debris colliding into it.

According to ‘Popular Mechanics’, it would cost around $200 million to launch an Ariane V rocket and get its 7000 kilograms of payload into a stable point in Earth orbit.

Should we clean up space?

According to ‘iNews’, there is approximately 8000 tonnes of space junk circulating Earth. Space trash is dangerous for aircrafts and satellites due to potential collision problems. This problem has been widely recognised by many space agencies – so much so that companies that launch satellites have been taking steps such as deorbiting satellites when their missions are finished.

According to ‘Encyclopaedia Britannica’, tests of technologies to remove space debris by capturing pieces with a net or harpoon have been made. Proposed constellations like SpaceX’s Starlink (4409 satellites) and Amazon.com’s Project Kuiper (3236 satellites), which would greatly increase the number of satellites in orbit, have had to include space debris mitigation plans when seeking approval from regulatory bodies.

According to National Geographic, in 2009, nearly 500 miles above Siberia, two satellites collided at some 36 000 km/h, bursting into a cloud of thousands of pieces of debris. Perhaps if we were able to remove non-functional satellites, we could prevent collisions like this happening?

Advantages of disposing e-waste to space

One advantage of disposing waste into space would be less earth area needed for landfills. To this day, landfills across the globe are overcrowded and hazardous to wildlife and humans. So much so that waste from landfills is finding its way into the oceans and springs. On average, plastic takes around 450 years to decompose – around 5 generations worth. Therefore, many people would agree that it would be worthwhile to simply dispose of the waste in space rather than keeping it on Earth.

What is being done to clean up space?

According to National Geographic, JAXA, Japan's space agency, is testing an electronic space whip that stretches six football fields long, known as the electrodynamic tether (EDT). The electrified line, nearly 700 metres long, is capped with a 20 kg weight. When deployed, it's intended to knock debris out of orbit, sending it to burn up in Earth's atmosphere. Not only this – there are talks of giant magnets in production to bring in all the non-used satellites and debris.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Rooibos heads to space
News
A South African scientific initiative linking agriculture and space research has officially launched today with the Rooibos in Space programme at Parklands College’s Innovation Centre in Cape Town.

Read more...
From the editor's desk: Local can be international
Technews Publishing Editor's Choice News
Welcome to the July 2026 issue of Dataweek. As you can see from this introduction, Dataweek’s regular editor, Peter Howells, is on extended leave and I am filling the void in his editor’s column – hopefully without being too boring.

Read more...
Landis+Gyr EMEA introduces new company name: EYKON
News
EYKON is the new company name of Landis+Gyr EMEA, formerly part of the Landis+Gyr Group. The company supports electricity, gas, water and thermal utilities in managing increasingly complex networks, improving operational efficiency and enabling more sustainable use of resources.

Read more...
Yamaha Robotics will show visitors to EFX
Manufacturing / Production Technology, Hardware & Services News
Yamaha Robotics will show visitors to EFX 2026, the Expo for Electronics Manufacturing, in Stuttgart from 6-8 October 2026, how advanced surface-mount automation helps companies grow their business and increase productivity.

Read more...
From the editor's desk: The art of measuring the truth
Technews Publishing Editor's Choice News
All electronic measurements are a lie. The trick is making the lie as small as possible.

Read more...
TSE has relocated
News
The Technology Station in Electronics (TSE) has entered a new chapter with its relocation from the CSIR campus to TUT-owned building at Ditsela Place in Hatfield.

Read more...
Innovative MyLegrand app
RS South Africa News
Legrand SA is set to launch the MyLegrand mobile application, a digital platform designed to strengthen engagement across its professional network.

Read more...
Kulani Energy acquires critical assets from Optipower
News
Kulani Energy preserves engineering, procurement, and construction capability and positions a wholly women-owned firm at the forefront of South Africa’s grid expansion.

Read more...
From Cape Town to Johannesburg
News
Würth Elektronik South Africa has taken a significant step forward with its recent relocation from Cape Town to Johannesburg, marking a new phase of growth and ambition for the company.

Read more...
Lesley Havenga: Building partnerships for Africa’s electronics future
Editor's Choice News
As Würth Electronik expands its footprint across South Africa and the broader sub-Saharan region, Havenga’s blend of manufacturing expertise, supply chain knowledge, and people-centred leadership appears well suited to the task.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved