CST Electronics

Tel: +27 11 608 0070
Email: [email protected]
www: www.cstelectronics.co.za
more information about CST Electronics

USB Type-C power delivery controller
30 June 2020, CST Electronics, Power Electronics / Power Management

The MAX77958 from Maxim Integrated is a robust solution for USB Type-C CC detection and power delivery (PD) protocol implementation. It detects connected accessories or devices by using Type-C CC detection ...
read more


Highly accurate 1-wire temperature sensor
29 April 2020, CST Electronics, Analogue, Mixed Signal, LSI

The MAX31825 temperature sensor from Maxim Integrated provides 8-bit to 12-bit Celsius temperature measurements with better than ±1°C accuracy from 0°C to +70°C and ±1,75°C from -45°C to +145°C. The ...
read more


Low-power power management IC
29 May 2020, CST Electronics, Power Electronics / Power Management

The MAX77654 from Maxim Integrated provides highly integrated battery charging and power supply solutions for low-power applications where size and efficiency are critical. The IC features a SIMO buck-boost ...
read more


Gate driver for silicon carbide transistors
29 January 2020, CST Electronics, Analogue, Mixed Signal, LSI

With the MAX22701E isolated gate driver from Maxim Integrated Products, designers of high-voltage/high-power systems can improve power supply efficiency, reducing power loss and the resulting carbon footprint. ...
read more


Isolated SiC gate driver
25 November 2019, CST Electronics, Analogue, Mixed Signal, LSI

With the MAX22701E isolated gate driver from Maxim Integrated Products, designers of high-voltage/high-power systems can improve power supply efficiency, reducing power loss and the resulting carbon footprint. ...
read more


Battery protectors with integrated fuel gauges
25 September 2019, CST Electronics, Power Electronics / Power Management

Designers concerned about battery safety now have access to an advanced battery protector with integrated fuel gauges from Maxim Integrated Products. The newest 1-cell, pack-side ICs in this portfolio ...
read more


Low-power real-time clock
31 July 2019, CST Electronics, Analogue, Mixed Signal, LSI

The MAX31341B nanoPower real-time clock (RTC) from Maxim Integrated Products enables designers of space-constrained systems such as wearables, medical monitors, point-of-sale (POS) equipment and portable ...
read more


Healthcare sensors for wearable devices
31 July 2019, CST Electronics, Analogue, Mixed Signal, LSI

Designers creating next-generation wearable health and fitness applications can reduce temperature measurement power with the MAX30208, as well as shrink optical solution size with the MAXM86161 from ...
read more


USB-C buck charger
29 May 2019, CST Electronics, Power Electronics / Power Management

Designers of portable Li-ion battery-powered electronics can add a USB Type-C (USB-C) charging system to their products with the MAX77860 3A switch-mode charger from Maxim Integrated Products. The device ...
read more


USB-C buck charger
30 April 2019, CST Electronics, Power Electronics / Power Management

Designers of portable Li-ion battery-powered electronics can add a USB Type-C (USB-C) charging system to their products with the MAX77860 3A switch-mode charger from Maxim Integrated Products. The device ...
read more


Multiple-output PMICs
30 January 2019, CST Electronics, Power Electronics / Power Management

The MAX17270, MAX77278, MAX77640/MAX77641 and MAX77680/MAX77681 power-management integrated circuits (PMICs) from Maxim Integrated Products help to reduce the power management footprint for space-constrained ...
read more


PMIC for optical measurements
30 January 2019, CST Electronics, Power Electronics / Power Management

The ultra-low-power MAX20345 from Maxim Integrated Products provides a way for designers of always-on wearable and Internet of Things (IoT) devices to extend battery runtime while shrinking form factor. ...
read more





<< First   < Previous   Page 4 of 52   Next >   Last >>







While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved