Electrocomp

Tel: +27 11 458 9000
Email: [email protected]
www: www.electrocomp.co.za
more information about Electrocomp

Rechargeable solid-state SMD battery
15 November 2017, Electrocomp, Power Electronics / Power Management

TDK has débuted CeraCharge, said to be the first solid-state rechargeable battery in SMD technology. Depending on requirements, the number of charge/discharge cycles this battery is able to perform ranges ...
read more


NTC inrush current limiters data book
15 November 2017, Electrocomp, Technical Literature

TDK has produced a fully revised data book for EPCOS NTC inrush current limiters, including the new P27 series with a lead spacing of 7,5 mm. These components have a disk thickness of 7 mm and are designed ...
read more


Film capacitors for AC applications
11 October 2017, Electrocomp, Passive Components

EPCOS MKP film capacitors of the B3275 series are optimised for use with AC voltages with high ripple currents. The new types are available for rated voltages of 250 VRMS, 275 VRMS and 310 VRMS and cover ...
read more


NTC inrush current limiters data book
11 October 2017, Electrocomp, Technical Literature

TDK has produced a fully revised data book for EPCOS NTC inrush current limiters, including the new P27 series with a lead spacing of 7,5 mm. These components have a disk thickness of 7 mm and are designed ...
read more


High-temperature MOVs
13 September 2017, Electrocomp, Circuit & System Protection

TDK has introduced leaded EPCOS metal oxide disk varistors which have now been approved for an increased operating temperature of 105°C (previously 85°C). The reason for this is the recertification ...
read more


TVS diode array
13 September 2017, Electrocomp, Circuit & System Protection

Bourns announced the release of a new ESD protection product, the Model CDDFN10-2574N, for high-speed communication port applications. The TVS (transient voltage suppressor) diode array comes in a DFN-10 ...
read more


Industrial power capacitors
13 September 2017, Electrocomp, Passive Components

TDK has significantly extended its range of EPCOS single-phase power capacitors for industrial electronics. The capacitors of series B32370* through B32374* are designed for rated AC voltages of between ...
read more


NTC inrush current limiters data book
13 September 2017, Electrocomp, Technical Literature

TDK has produced a fully revised data book for EPCOS NTC inrush current limiters, including the new P27 series with a lead spacing of 7,5 mm. These components have a disk thickness of 7 mm and are designed ...
read more


Clamp AC current sensor
16 August 2017, Electrocomp, Test & Measurement

TDK has expanded its CCT series of clamp AC current sensors with a new 600 A type, positioning its product lineup to meet the high-current sensing needs of energy management systems (EMS) for buildings, ...
read more


Electrocomp holds successful technical seminars
19 July 2017, Electrocomp, News

The Electrocomp Group once again held its ‘SA Best’ technical training seminar series on 16 May at Gallagher Convention Centre in Johannesburg; 17 May at Sica’s Guest House in Durban; and 18 May at Stellenbosch ...
read more


64-bit single-board computer
19 July 2017, Electrocomp, Computer/Embedded Technology

The Pine A64 single-board computer is based on a 1,2 GHz quad-core ARM Cortex A53 64-bit processor that executes both 64- and 32-bit code for scalable performance. Two models are available. The ‘Basic’ ...
read more


High-voltage contactors
19 July 2017, Electrocomp, Switches, Relays & Keypads

TDK’s new HVC200A is a bipolar high-voltage contactor for the switching of high DC voltages and currents. It is designed for operating voltages of up to 450 V d.c. and a high continuous current of 200 ...
read more





<< First   < Previous   Page 21 of 125   Next >   Last >>







While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved