Future Technology Devices International (FTDI) has supplemented its portfolio of USB-to-serial interface products with the release of its new X-Chip series.
Made up of devices in 13 different package options, the X-Chip series complements the company’s existing FT-R and FT-H offerings, and supports a broad selection of interface types, such as basic UART, full UART, FIFO and I²C, as well as FTDI’s proprietary FT1248 I/O (including provision for enhanced SPI).
Devices in the series are capable of data rates of up to 3,4 Mbps, while maintaining low power consumption <8 mA when fully active and <125 A while in suspend mode.
With recent amendments being made to the USB specification regarding more rapid charging of portable electronics devices, the X-Chip has built-in functionality to detect a charging port and cause logic to switch from data transfer to charging mode.
This feature means that detection does not have to be carried out by the system’s microcontroller/microprocessor, thereby allowing it to focus fully on its core activities. The end result is a simpler detection process and the capability to charge at a higher current level which shortens the time required for battery charging.
Windows 7, Windows Vista, Windows XP, Windows XP Embedded, Windows CE, Mac OS-X, Linux 3.2 (and above), plus Android operating systems are all supported. Furthermore, the required USB drivers are free to download from the FTDI website. Since the entire USB protocol is handled by the device, the need for the programming of USB specific firmware can be negated. An internal 2048 Byte, multi-time programmable (MTP) memory enables storage and configuration of the necessary device descriptors.
The devices in the X-Chip series are offered in compact SSOP, QFN and DFN packages.
Each has an operational temperature range of -40°C to +85°C. In addition to the ICs, FTDI has released a wide selection of development modules, enabling the different functions for each chip type, and thus allowing for easy device evaluation and prototyping development.
Sigfox SA powers smart connectivity
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Sigfox South Africa is carving out a unique role, delivering low-power, wide-area network connectivity designed specifically for Internet of Things applications.
Read more...Modern LTE connectivity for IoT Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Designed to meet the evolving requirements of industrial and commercial applications, the SIMCom A7681E LTE Cat-1bis module combines simplified hardware architecture with long lifecycle support in a compact package.
Read more...Seeing through the noise RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
How Adaptive Long Coherent Integration (ALCI) delivers superior measurement and positioning performance where conventional receivers fall short.
Read more...Optical Ethernet connectivity for rugged environments Hiconnex
Telecoms, Datacoms, Wireless, IoT
The rugged Stratos T2 Series media converter maintains high data throughput and durability in mission-critical applications in security, tactical, and military communications.
Read more...Next-gen SPE Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Next-generation 100/1000BASE-T1 Single Pair Ethernet PHYs integrate MACsec security, time sensitive networking, and functional safety.
Read more...LTE migration for legacy devices iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel’s EG800Q-GL offers a low-cost upgrade path from 2G communication for legacy M2M devices and payment terminals.
Read more...Contactless IO-Link without wear IOT Electronics
Telecoms, Datacoms, Wireless, IoT
Phoenix Contact’s IO-Link couplers transmit up to 18 W of power and IO-Link data at speeds of up to 230,4 kbps across an air gap.
Read more...High-power RF amplifier design best practices RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
By focusing on practical design considerations and planning for real-world conditions, engineers can build amplifiers that perform consistently and remain reliable over time.
Read more...Bluetooth Classic and LE Audio module RF Design
Telecoms, Datacoms, Wireless, IoT
Refresh legacy Bluetooth designs and unlock Bluetooth Core 6.0 LE Audio in one rugged, ready to implement module.
Read more...HackRF Pro targets advanced RF IOT Electronics
Telecoms, Datacoms, Wireless, IoT
The SDR can operate across an extensive frequency range from 100 kHz to 6 GHz, making it suitable for a broad range of applications, including wireless testing, signal analysis, and emerging communications technologies.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version