15 November 2017
Power Electronics / Power Management
Analog Devices introduced the LTC4091, a complete lithium-ion battery backup management system for 3,45 V to 4,45 V supply rails that must be kept active during a long duration mains power failure. The device employs a 36 V monolithic buck converter with adaptive output control to provide power to a system load and enable high efficiency battery charging from the buck output.
When external power is available, the device can provide up to 2,5 A of total output current and up to 1,5 A of charge current for single-cell 4,1 V or 4,2 V Li-Ion batteries. If the primary input source fails and can no longer power the load, the LTC4091 provides up to 4 A to the system output load from the backup Li-Ion battery via an internal ideal diode, and unlimited current if an external ideal diode transistor is used. To protect sensitive downstream loads, the maximum output load voltage is 4,45 V.
The device’s PowerPath control provides a seamless switchover between input power and backup power during a power fail event, and enables reverse blocking with a shorted input. Typical applications for the LTC4091 include fleet and asset tracking, automotive GPS data loggers and telematics systems, security systems, communications and industrial backup systems.
The LTC4091 includes 60 V absolute maximum input over-voltage protection, making the IC immune to high input voltage transients. Its battery charger provides two pin-selectable charge voltages optimised for Li-Ion battery backup applications: the standard 4,2 V, and a 4,1 V option that trades off battery run time for increased charge/discharge cycle life.
Other features include soft start and frequency foldback to control output current during startup and overload, as well as trickle charge, automatic recharge, low battery precharge, charge timer termination, thermal regulation and a thermistor pin for temperature-qualified charging.
The LTC4091 is housed in a low-profile (0,75 mm), 22-pin 3 x 6 mm DFN package with a backside metal pad for excellent thermal performance. The device operates from –40°C to 125°C in both E and I grades.
Analysis of switch-mode power supply: inductor violations Altron Arrow
Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.
Read more...Microsoft Windows IoT on ARM Altron Arrow
Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.
Read more...Microchip introduces ECC608 TrustMANAGER Altron Arrow
Circuit & System Protection
To increase security on IoT products and facilitate easier setup and management, Microchip Technology has added the ECC608 TrustMANAGER with Kudelski IoT keySTREAM, Software as a Service (SaaS) to its Trust Platform portfolio of devices, services and tools.
Read more...SolidRun unveils new SoM Altron Arrow
AI & ML
SolidRun and Hailo has unveiled a game-changer for engineers and AI product developers with the launch of their market-ready SoM, which packs the cutting-edge capabilities of the Hailo-15H SoC.
Read more...An evolutionary step in customisable logic Altron Arrow
DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.
Read more...Compact PCB-mount SMPS RS South Africa
Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.
Read more...AC-DC brick PSU Conical Technologies
Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.
Read more...5 kW switching PSU range Conical Technologies
Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.