Enclosures, Racks, Cabinets & Panel Products


Enclosures for mounting electronic applications

30 September 2020 Enclosures, Racks, Cabinets & Panel Products

Available from Gainta is a range of plastic enclosures for mounting and assembly of general electronic applications. The bases of the cases have a mounting flange and incorporate a tongue and groove sealing system with a neoprene gasket; this sealing system is used for the lid as well.

The bosses inside the bases are designed for M3 self-tapping screws, while the flanged wall mounting holes are designed for either M3 or M4 pan head machine screws, depending on the model. Internal guide slots are also provided for vertical mounting of printed circuit board assemblies. The cases offer IP65 protection according to IEC 529 and NEMA 4.

The G3xxMF series is supplied in dark grey made from high-impact ABS and is suitable to operate in temperatures ranging from -20°C to +80°C. The G2xxMF (light grey) and G2xxCMF (light grey with clear lid) series are constructed from polycarbonate and are suitable for temperatures between -40°C and +120°C. All series are available in sizes ranging from 64 x 58 x 35 mm to 222 x 146 x 75 mm.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Enclosures for small table-top instruments
30 September 2020, Avnet Abacus , Enclosures, Racks, Cabinets & Panel Products
The Evotec range of table-top plastic enclosures, made by OKW, is suitable for tough working environments in applications such as measurement and control engineering, IT, medical, laboratory and environmental ...

Read more...
Stylish new plastic enclosure family
30 September 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Electronics has announced its new 1557 family. Initially available in four plan sizes, each in two heights, it is available in polycarbonate sealed to IP68 and ABS designed to meet IP66. The sizes ...

Read more...
Range of DIN rail enclosures
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
The CNMB range of DIN rail enclosures provides a diverse selection of modular housings which are available in eight set lengths. They are optimised for a wide range of electrical and electronics industries ...

Read more...
Rittal’s range of compact and small enclosures
30 September 2020 , Enclosures, Racks, Cabinets & Panel Products
After more than 50 years and 35 million enclosures sold, Rittal has introduced its small and compact enclosures in the form of the AX and KX series. According to managing director of Rittal South Africa, ...

Read more...
Versatile rack cases
30 September 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
Rack cases are a key building block of rack mounting systems, enabling electronic, electric and electro-mechanical sub-systems and assemblies to be mounted easily in any standard 19” enclosure. For ...

Read more...
Industrial enclosures in stainless steel
31 August 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
The IP66 EJSS family from Hammond Electronics is available in 304 or 316 grade stainless steel, supplied as standard in a natural smooth brushed finish. Sealed to IP66, the EJSS is designed for use as ...

Read more...
Navigating EMI challenges in next-generation railway technology
31 August 2020, Actum Group , Enclosures, Racks, Cabinets & Panel Products
The advent of new-age connectivity, such as 5G networks and LTE, has enabled railway systems to process higher volumes of data digitally, which has significantly improved operational safety, efficiency ...

Read more...
DIN rail enclosures
30 June 2020, Electrocomp , Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has announced its 1597DIN family of UL94-V0 flame-retardant plastic enclosures for mounting to standard IEC/EN 60715 35 mm DIN rails for applications such as industrial control equipment, ...

Read more...
Company profile: Rittal
30 June 2020, Rittal , Enclosures, Racks, Cabinets & Panel Products
Rittal was founded by Prof. Friedhelm Loh in 1961 in Herborn, Germany. The enclosure specialist forms part of a larger family-owned group called the Friedhelm Loh Group. Today, the company has 10 000 ...

Read more...
Verotec’s Diplomat cases and caseframes
30 June 2020, Vepac Electronics , Enclosures, Racks, Cabinets & Panel Products
Verotec’s Diplomat metal enclosure range is recognised worldwide as one of the leading products in its field, having evolved around a number of international standards and in response to a number of trends. ...

Read more...