Analogue, Mixed Signal, LSI


Ultra low-power temperature sensor

28 February 2022 Analogue, Mixed Signal, LSI

The STS4x is Sensirion’s highly accurate digital temperature sensor series, available with minimal lead times. It is a fully digital, cost-efficient platform that is available in different accuracy classes.

The sensor range features enhanced signal processing, three distinct I2C addresses and communication speeds of up to 1 MHz. The dual-flat no-leads (DFN) package has a footprint of only 1,5 x 1,5 mm2 while retaining a height of 0,5 mm, which allows for easy integration of the STS4x series into various applications. A wide supply voltage range of 1,08 V to 3,6 V and low current consumption of 0,4 µA (for a typical average current at 1 measurement per second) enables battery-driven designs.

Thanks to Sensirion’s CMOSens Technology, the STS4x range benefits from the high-tech engineering of a wide range of sensor components. It is designed for mass production, comes with a high signal-to-noise ratio and high process capability, and is proven to be highly reliable and stable over the long term.

Typical applications include air conditioners, HVAC/appliances, industrial monitoring, smart home applications and consumer electronics/mobile devices.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

TDK announces robust varistors with 14 mm disk diameter
Electrocomp Passive Components
The new AdvanceD series of varistors have a wide operating voltage range up to 625 V and offer a surge current capability of 3000 A.

Read more...
Compact varistors offer surge capability of 6000 A
Electrocomp Circuit & System Protection
TDK has released the new EPCOS B72314S2* series of leaded disk varistors which cover a wide operating voltage range of 175 VRMS to 625 VRMS.

Read more...
Short body USB-A with no compromise on performance
Electrocomp Interconnection
The all-new USB1125 connector from GCT with a minimal PCB footprint of just 13mm2 is 25% smaller than full-size equivalents.

Read more...
Bourns releases new series of power inductors
Electrocomp Power Electronics / Power Management
Constructed with a magnetic-silica coating to the perimeter of the inductor winding to provide effective shielding, these inductors release lower magnetic field radiation compared to non-shielded inductors.

Read more...
IP68 sealed enclosures from Hammond Manufacturing
Electrocomp Enclosures, Racks, Cabinets & Panel Products
Hammond Manufacturing has introduced the 1551W series, IP68 sealed versions of its popular 1551 miniature enclosure family, in five initial sizes.

Read more...
Low power 36 V operational amplifier
EBV Electrolink Analogue, Mixed Signal, LSI
The TSB622 is a general-purpose, dual operational amplifier featuring an extended supply voltage operating range of 2,7 to 36 V and rail-to-rail output

Read more...
Quad-output buck regulator
Altron Arrow Analogue, Mixed Signal, LSI
The LTM4673 from Analog Devices is a quad-output µmodule buck regulator which has a wide input voltage range and built-in digital power system management.

Read more...
New series of power ribbon wire-wound resistors
Electrocomp Power Electronics / Power Management
This QL/QRZG series of high-power resistors have a high-power load up to 2500 W and are suitable for applications such as industrial braking, EV battery packs and charging stations.

Read more...
Surface-mount resettable fuses
Electrocomp Passive Components
The new series of fuses, suitable for overcurrent and thermal protection, expand the hold current up to 6 A and the maximum voltage to 33 V DC.

Read more...
u-blox’ smallest ever GNSS module
RF Design Analogue, Mixed Signal, LSI
Designing an anomaly detection library with AI learning capability is possible with minimal data and with no specific data-science skills needed.

Read more...