Power Electronics / Power Management


Energy storage solutions are crucial to SA’s energy transition

31 July 2024 Power Electronics / Power Management

With South Africa facing a critical juncture in its energy transition – needing to meet rising demand while reducing emissions – energy storage is key, promising stable grids and integrating renewables. However, when discussing South Africa’s energy transition and the role of energy storage, it is crucial to differentiate between two distinct segments – in-front-of-the-meter systems and behind-the-meter systems. These segments have different timelines, approaches, and resource pools, but both are equally important for the country’s transition.

Behind-the-meter (BTM) systems are typically smaller, and usually fall into the private sector space such as residential, commercial, and industrial systems. These systems are quicker and easier (although still complex) to install and could have a faster impact on South Africa’s transition. This impact of distributed systems has already been seen over the past three years with the proliferation of solar PV installations, mainly by small businesses and residential users.

In-front-of-the-meter (FTM) systems are bigger utility-scale projects that will be driven by Eskom or other power utilities or independent power producers (IPPs) and Eskom. These are typically long-term projects and solutions that could take four to six years, or more to complete.

While both are crucial to South Africa’s energy transition, behind-the-meter solutions provide immediate relief to the country’s energy constraints. In-front-of-the-meter projects are key to meeting actual energy transition targets and reducing emissions. These are typically large sustainable projects that will enhance the larger grid infrastructure utilisation and ultimately assist to reduce the reliance on coal power stations.

Energy goals

Energy storage is considered crucial for South Africa’s energy goals, particularly in ensuring stable grids and integrating renewables. This is because, while the country has great renewable energy sources, its load profile does not align with the renewable energy generation profile.

Hence, we need energy storage solutions to store energy during peak generation time, when there is lower demand. Excess energy produced during peak generation periods should be stored in energy storage systems, and dispatched during high-demand periods, which will ensure a more efficient energy network.

Yet, this is where we have a problem in South Africa, because in areas of the highest solar irradiance, where solar PV projects are most economical, we have grid capacity constraints and a lack of energy storage solutions. Currently, projects are underway to implement large battery energy storage systems in strategic locations so that excess energy is not lost, but these projects take time.

To have a sustainable electricity network, energy storage is a crucial part of the system. While technology is likely to evolve and change in the future, there must be some sort of storage system as part of the long-term solution for the country’s energy transition.

Unfortunately, various factors have contributed to the slow adoption of energy storage in South Africa. With the rapid advancement of technology over the past few years, it has been difficult for investors to align with and invest in a specific technology and solution for local production, without knowing whether it will still be viable in a few years. The lack of a sufficient regulatory framework also added uncertainties to the industry.

Loadshedding has forced the country to transition very quickly to accepting energy storage solutions in behind-the-meter applications. However, it has been a far harder sell when it comes to commercial and industrial consumers because, depending on the type of load and the number of hours of backup they need, the return on investment can be between five and eight years, with solar PV included.

Encouragingly, people are starting to better understand all the benefits of energy storage. Along with the maturity of solutions and the energy environment, various measures can be implemented to accelerate energy storage adoption in South Africa. For example, a significant driver is the tax relief provided through Section 12B of the Income Tax Act, which offers favourable tax incentives to consumers that invest in renewable energy, specifically for systems coupled to solar PV installations. It will be beneficial if this relief is extended past the date of 28 February 2025 and expanded to include battery energy storage systems, with or without being coupled to solar PV systems.

Additionally, proper financial structures and frameworks should be developed by all utilities for selling excess energy back into the grid. From a residential, commercial, and industrial point of view, this would also make the adoption of energy storage solutions a lot easier. Finally, energy wheeling and trading through municipal infrastructure, some of which already have proper fee structures and frameworks in place, could be implemented.

Other than merely side-stepping loadshedding, there are many other benefits to energy storage solutions, which people should understand and use to make informed decisions. Users should get an experienced partner that is qualified to provide them with the best advice and technical solutions for their specific needs.

For more information contact ACTOM, +27 10 136 0216, [email protected], www.actom.co.za




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Powering Innovation eBook: Changing what’s possible
Power Electronics / Power Management
This exclusive read, entitled ‘Changing what’s Possible,’ delves into how power dense Vicor modules enable many world-changing innovations across various sectors.

Read more...
16-channel multicell battery monitor
Altron Arrow Power Electronics / Power Management
The ADBMS6830B is a multicell battery stack monitor that measures up to 16 series-connected battery cells with a lifetime total measurement error of less than 2 mV.

Read more...
Reliable redundancy with the Mibbo M3DN Series
Conical Technologies Power Electronics / Power Management
Designed for use with two parallel-connected power supplies, the M3DN Series allows for true redundancy, making it ideal for mission-critical applications.

Read more...
Automotive power-over-coax inductor
RS South Africa Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.

Read more...
Rugged PSU for challenging conditions
Conical Technologies Power Electronics / Power Management
Built for rugged reliability, the Mibbo MFC Series delivers stable, efficient power in environments where moisture, dust, and temperature extremes are everyday challenges.

Read more...
Enhance SiC device efficiency using merged-pin Schottky diodes
NuVision Electronics Editor's Choice Power Electronics / Power Management
Silicon carbide (SiC) has advantages over silicon (Si) that make it particularly suitable for Schottky diodes in applications such as fast battery chargers, photovoltaic (PV) battery converters, and traction inverters.

Read more...
15 W power module with wide input range
Brabek Power Electronics / Power Management
RECOM’s miniature power modules provide 15 W output and operate over a wide input range of 18-264 V AC or 18-375 V DC.

Read more...
Industrial-grade DIN rail PSU
Conical Technologies Power Electronics / Power Management
The Mibbo MTR960W is a reliable and cost-effective PSU option that delivers a solid 960 W of output power at 24?or 48 V DC.

Read more...
Energy harvesting and Matter for smarter homes
RF Design Power Electronics / Power Management
Qorvo’s collaboration with e-peas on the Matter Enabled Light Switch marks another significant step in advancing Matter adoption across the IoT industry.

Read more...
3-terminal filters for automotive applications
RS South Africa Power Electronics / Power Management
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4,7 µF.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved