Hittite has introduced two new analog-to-digital converter (ADC) products which offer low power consumption in ultra high-bandwidth applications.
The HMCAD1104 is a 10-bit octal-channel ADC which operates at 65 MSps, delivering a signal-to-noise ratio (SNR) of 61,6 dB, while dissipating only 30 mW of power per channel. The combination of low power consumption and compact 9 x 9 mm QFN SMT packaging make it well suited for handheld and other portable instrumentation applications.
The HMCAD1104 is pin-compatible with Hittite’s family of 12-bit ADCs including the HMCAD1100, HMCAD1101 and HMCAD1102, all of which are compatible with the EasySuite Test and Evaluation Tool for analysis and system configuration.
Ease of use is further enabled by various modes and configuration settings that can be applied to the HMCAD1104 through the serial control interface (SPI); these include channel-specific power-down, common-mode driver strength, and coarse and fine gain control.
The HMCAD1104 is specified for operation over the industrial temperature range of –40°C to +85°C, while the serial LVDS output is designed to easily interface with FPGAs from several suppliers.
For high-performance applications which require sampling speeds to 26 GSps, Hittite has also released the HMCAD5831LP9BE 3-bit ADC. This wideband ADC is targeted at extreme applications in radar, radio astronomy and test and measurement equipment.
Features such as a wide input bandwidth up to 20 GHz and a sampling rate up to 26 GSps enable quantisation of high-bandwidth signals up to 20 GHz with good INL and DNL performance.
The HMCAD5831LP9BE is designed in a full Flash architecture and provides Data XOR and Inhibit functions to ease FPGA programming. It is housed in a RoHS compliant 9 x 9 mm SMT package.
High-temperature closed-loop MEMS?accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Dual accelerometers on the same die Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV320X is the first mainstream inertial sensor to house a gyroscope alongside two accelerometers, one capable of sensing up to ±16 g and one sensing up to a staggering ±320 g.
Read more...Dual-range IMU with edge processing EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...Energy harvesting and Matter for smarter homes RF Design
Power Electronics / Power Management
Qorvo’s collaboration with e-peas on the Matter Enabled Light Switch marks another significant step in advancing Matter adoption across the IoT industry.
Read more...Dual-band GNSS antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The Taoglas Accura GVLB258.A, is a passive, dual-band GNSS L1/L5, high-performance antenna for high precision GNSS accuracy and fast positioning.
Read more...High-reliability isolation amplifiers EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...Mibbo QT2C Series signal isolators Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
Read more...IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version