The Lab-Flex AF family is an upgraded version of Florida RF Labs’ Lab-Flex cable which has been modified to handle the harsh environments associated with most airborne, shipboard and ground-based applications.
The proprietary cable assembly design utilises a redundant sealing system to ensure moisture resistance to both cable and connector interfaces. This design has been fully qualified to meet or exceed all the requirements of MIL-T-81490 in designs up to 40 GHz.
It also employs a very durable dielectric design which is able to withstand crushing or kinking. This optimised, triple-shielded cable design is protected by a Nomex jacket which provides abrasion resistance during installation and general use of the assembly.
One characteristic of Lab-Flex cables is the cable-to-connector termination utilising solder sleeves. Common methods of cable terminations such as crimping or clamping the outer cable braids to the connector body does not capture all of the braid, which leads to intermittent electrical performance and low connector (retention) pull strength.
With the Lab-Flex solder sleeve, both the inner and outer braid are directly soldered 360 degrees around the sleeve. This solder sleeve provides the best braid-to-connector termination, assuring enhanced electrical performance and high retention pull strength.
Omniball through-hole contacts Spectrum Concepts
Interconnection
Mill-Max has introduced an expansion to its Omniball spring-loaded contact range with a new series of through-hole mount Omniball pins designed for robust and versatile interconnect solutions.
Read more...Multi-band GNSS patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.
Read more...Wideband MMIC power amp RF Design
Telecoms, Datacoms, Wireless, IoT
The Qorvo QPA2597 is a wideband MMIC power amplifier built using proven GaN on SiC technology and designed to operate across the 2 to 6 GHz frequency range.
Read more...Phoenix’s Push-X range is growing Phoenix Contact
Interconnection
With the new XT 1,5 terminal blocks, Phoenix Contact is extending the series to include versions for conductor cross-sections from 0,34 to 2.5 mm2.
Read more...Connector range for demanding environments Future Electronics
Interconnection
TE Connectivity’s DEUTSCH connector range offers high-performance interconnect solutions engineered for demanding environments where reliability and durability are essential.
Read more...The mechanical side of power Spectrum Concepts
Interconnection
[Sponsored] Power delivery has always been a key requirement of electronic systems, but the way power is generated, distributed, and consumed is changing rapidly with renewable energy installations and energy storage systems introducing new power sources.
Read more...u-blox redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
Read more...Multiprotocol SoC RF Design
Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding wireless Bluetooth designs.
Read more...Ceramic substrate loop antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The DLA.01 DECT ceramic loop antenna from Taoglas is a miniature edge mounted antenna designed for compact devices with minimal space availability.
Read more...Magnetic connectors with 2,54 mm pitch Spectrum Concepts
Interconnection
This expansion of the company’s Maxnetic product line delivers next-generation high reliability magnetic connectors designed for use in ever shrinking electronic devices and their applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version