Peregrine Semiconductor recently announced the expansion of its high-linearity, low insertion loss RF switch family with the availability of the HaRP technology-enhanced SPDT PE42422 RF switch.
The new switch provides linearity of 115 dBm IIP2 and 70 dBm IIP3; low insertion loss of 0,4 dB @ 3 GHz, and high isolation of 28 dB @ 3 GHz, enabling better overall system performance. It covers a wide frequency range of 100 MHz–6 GHz and, using a nominal +3 V power-supply voltage, a typical input 0,1 dB compression point of +36 dBm can be achieved.
The PE42422 is available in a 2 x 2 mm QFN package, making it well suited for general-purpose RF switching applications such as filter-bank switching in test equipment and base stations.
The 50 &Omega, reflective switch features on-chip, low-voltage CMOS control logic and a wide operating voltage range of 2,3–5,5 V, enabling it to be used it in a variety of ways.
ESD performance of 4 kV HBM for RF pin to ground simplifies manufacturing and improves product reliability. Additionally, with low power consumption of 120 μA, the PE42422 switch helps to extend battery life in portable devices.
IMU with dual-sensing capability EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.
Read more...Wi-Fi 7 front-end module RF Design
Telecoms, Datacoms, Wireless, IoT
The Qorvo QPF4609 is an integrated front end module designed for 802.11be systems that has integrated matching, which minimises layout area.
Read more...Precision JFET op-amp Altron Arrow
Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.
Read more...GNSS chipset for wearables RF Design
Telecoms, Datacoms, Wireless, IoT
The UBX-M10150-CC from u-blox is a GNSS chip that supports GPS, QZSS/SBAS, Galileo, and BeiDou constellations, and is designed for integration into wearable applications.
Read more...X-band radar RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...GNSS antenna redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...u-blox expands NORA-B2 BLE modules RF Design
Telecoms, Datacoms, Wireless, IoT
The new nRF54L chipset-based wireless modules reduce current consumption and double processing capacity, catering to diverse mass market segments.
printer friendly version